IMPROVED DESIGN AND MODELLING OF THE BACKHOE ARM OF A BACKHOE LOADER.

Journal Title: International Journal of Advanced Research (IJAR) - Year 2019, Vol 7, Issue 2

Abstract

This research presents an improved design and modelling of the backhoe arm of the backhoe loader. It entails finite element analysis (FEA) and material based optimization of the backhoe arm, aimed at improving the loading capacity of the bucket of the backhoe arm while decreasing its digging forces. The stress analysis of the boom, arm and bucket of the backhoe were done by the use of ANSYS after which the backhoe arm was modelled with the use of SOLIDWORKS, a CAD software. The results obtained showed a breaking force of the bucket as 30.34 kN and a curling force of the arm as 29.34 KN, both about 43% reduction compared to the values of 71.00 KN and 64 KN respectively, obtained by the conventional backhoe loader. The results further showed an improved bucket volume capacity leading to an increase in the number of teeth of the backhoe as opposed to the number used in conventional backhoe loaders. It was thus recommended that the number of the backhoe bucket teeth should be increased with a reduced diameter to minimise friction losses during digging while the backhoe arm should be re-designed to absorb and reduce to the bearest minimum, the vibrations produced during its working cycle.

Authors and Affiliations

Anthony Kpegele Le-ol, Charles B. Kpina.

Keywords

Related Articles

EFFECT OF OXYGEN CONCENTRATION ON DEVELOPMENT AND QUALITY OF EMBRYOS DURING INTRACYTOPLASMIC SPERM INJECTION (ICSI).

Background: Elevated and non-physiological O2 concentrations could create unfavorable conditions in the substrate to produce free oxygen radicals that cause oxidative stress, which may be involved in the etiology of defe...

A STUDY ON COPPER SLAG AS REPLACEMENT OF FINE AGGREGATE WITH ADDITION OF RED SOIL.

This paper reports an experimental program to investigate the effect of using copper slag as a complete 100% replacement of sand on the property of fine aggregate. Addition of red soil in ratio 0%, 5%, 10% in cement.M25...

CARDIAC AUTONOMIC NEUROPATHYEXPERIENCE OF DEPARTMENT OF CARDIOLOGY A, IBN SINA UNIVERSITY HOSPITAL CENTER, RABAT, MOROCCO.

Introduction: Cardiac autonomic neuropathy (CAN) is a common complication of diabetes mellitus, which is associated with a higher risk of morbidity and mortality. It can be detected by analyzing spontaneous (Holter) or p...

THE CAUSAL RELATIONSHIP BETWEEN INFANT MORTALITY AND FERTILITY RATE IN GHANA: ECONOMETRIC AND TIME SERIES ANALYSIS

Infant mortality has been a major public health issue from time immemorial. Understanding the association between infant and childhood mortality and total fertility is essential especially to countries that are currently...

EVALUATION OF ROOT AND CANAL MORPHOLOGY OF MAXILLARY PERMANENT PREMOLARS IN AN EGYPTIAN POPULATION BY CONE-BEAM COMPUTED TOMOGRAPHY.

Introduction: The purpose of this study was to evaluate the number of roots and canal morphology of maxillary permanent premolars in Egyptian population. Methods: seven hundred and eighteen cases were included in this st...

Download PDF file
  • EP ID EP484307
  • DOI 10.21474/IJAR01/8535
  • Views 33
  • Downloads 0

How To Cite

Anthony Kpegele Le-ol, Charles B. Kpina. (2019). IMPROVED DESIGN AND MODELLING OF THE BACKHOE ARM OF A BACKHOE LOADER.. International Journal of Advanced Research (IJAR), 7(2), 673-684. https://europub.co.uk/articles/-A-484307