Improvement of Casting Technology by Using of Exothermic Feeder Head and Simulation the Solidification Alloy
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2012, Vol 35, Issue 4
Abstract
This paper presents a simulation program use of feeders exothermic and insulating plates. High quality casting is considerably improved by using solidification simulation flow and cast.
Authors and Affiliations
Beatrice TUDOR
Keywords
Related Articles
- EP ID EP608934
- DOI -
- Views 61
- Downloads 0
Compressive Behaviour of Ultra-Sonicated Starch / Carbon Black / Epoxy Composites
Fillers are generally used in order to change some basic properties of polymer matrix but the filler particles often tend to aggregate with consequences in terms of the mechanical properties of the final composite. In or...
Some Considerations on Environmental Sand Cores with Inorganic Binder
Traditionally, complex sand cores are produced using organic binders such as phenolic and furan resins. These binders can create bad smelling fumes requiring complex and expensive ventilation equipment to fulfill environ...
Conductive-Atomic Force Microscopy Investigation of the Electrical Properties of Low Temperature Deposed ZnO Transparent Thin Films
The paper presents the investigation by conductive-atomic force microscopy (C-AFM) of the variation of the local conductivity and topography of the transparent ZnO thin films deposed onto soda lima glass substrates by sp...
Policies for Economic Efficiency. Providing Utilities in Public Administration
The reality of the contemporary world has shown that there is an increasing interdependent power often turned into political pressure. Today, in Europe 25% of the imports of natural gas come from Russia. Therefore, reduc...
Structure of the Eutectoid Zn-Al Alloy Obtained by Directed Solidification
This work analyses the structure of the eutectoid Zn-Al based alloy directionally solidified, with cooling rates ranging between 8.5-0.4 oC/sec. During cooling, the temperature gradient in the liquidus zone, respectively...