Improving a procedure for determining the assay of gold in a precious alloy of different composition using a touchstone
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 2, Issue 12
Abstract
<p>We report testing the yellow and white jewelry alloys based on gold that contains nickel, zinc, palladium, using a touchstone by applying various chemical reagents and XFA (X-ray fluorescence analysis).</p><p>We have improved the procedure for assessing the conformity of assay of the precious alloys based on gold, considering the content of component composition by using the results from rubbing the alloys on a touchstone.</p><p>It was established that the magnitude of gold assay for precious alloys in the system AuAgZnCu, determined under the action of the reagent "chloric gold" on the touchstone, depends on the manifestation of contrast in the course of quality reaction against a standard sample (touch-needle).</p><p>Under the influence of the reagent, the "yellow" gold alloys demonstrate chloride compounds with silver and copper, being reduced to a metal powder of black and brown color. In this case, copper dissolves while gold, together with silver, forms an intensive residue on a strip that depends on the ligature composition of the alloy. It was established that the lower the assay of a tested sample, the greater the amount of "chlorine gold" that decomposes, the larger the sediment of silver chloride and the pure gold reduced from the reagent, and hence the darker the sediment.</p><p>It has been proven that testing the precious alloys of red color from the system AuAgZnCu 585 with a content of zinc (over 2 %), nickel, indium by using a reagent based on potassium dichromate and copper chloride is not effective.</p><p>The results of our analysis indicate the increased gold assay compared with a standard touch-needle.</p><p>To eliminate this phenomenon, it is recommended that one should first determine the composition of an alloy by the XFA method and construct an algorithm for testing in accordance with the content of the alloy by other reagents.</p><p>It was determined that the gold assay defined on a touchstone for alloys from the system AuAgZnCu 585 (a content of zinc is over 2 %) is more contrast under the influence of acidic reagents and depends on the component composition of the alloy.</p><p>It has been proven that the alloy of "white gold", composed of palladium and silver (AuAgPd585), is not affected by the acid reagent for gold assay 585.</p><p>Testing the alloy of "white gold" (AuAgPd585) using an acid reagent for gold assay 750 yields the dark sediment of a bluish tint.</p><p>We have established a more contrast effect on the alloys of "white gold" and "yellow gold" of assay 750 from the acid reagent for gold alloys of assay 750.</p>
Authors and Affiliations
Tatyana Artyukh, Galyna Kupalova, Viktor Bazylevych, Inna Hryhorenko, Alla Ternova
Keywords
Related Articles
- EP ID EP666358
- DOI 10.15587/1729-4061.2019.165408
- Views 78
- Downloads 0
Developing a technology for making goat's cottage cheese using the preparation Yodkazeine
<p>In recent years, there has been a deficit of several essential components, with the iodine deficiency of varying degree, from mild to severe, relating to the most common phenomena and is observed in 90 % of the Ukrain...
Determination of the optimal parameters of a tubular belt conveyor depending on such an economical
<p class="20">We have investigated the influence of belt operation durability on the cost of transporting a ton of cargo. The study revealed that the longer the durability of a transporting installation, the lower the co...
An algebraic method for calculating PageRank
<p>An algebraic method is proposed for finding PageRank estimates for pages of websites. The amount of calculation in the proposed method does not depend on the value of the damping coefficient, which allows obtaining mo...
Optimization of the deposition conditions for Ni(OH)2 films for electrochromic elements of “smart” windows
<p class="1">Thestudywasconductedinordertodeterminethe influenceoftwofactorsonelectrodepositionofNi(OH)<sub>2 </sub>films: concentrationofnickelnitratein the electrolyteanddrying stage between deposition and electrochemi...
Development of algorithms for improving the accuracy and performance speed of a functional analogtodigital converter
<p>This paper presents results of the study into the functional analog-to-digital conversion with a replaceable logarithm base. In known analog-to-digital converters, an increase in speed leads to a decrease in accuracy...