Improving Deposition Quality of Stellite Powder on Valve Seats by Optimized TIG Welding Parameters
Journal Title: International Journal of Experimental Research and Review - Year 2024, Vol 45, Issue 9
Abstract
The quality of the Stellite powder coated on these valve seats depends on the discharge profile and is crucial to the service length and quality of these seats, especially when called upon to work at their maximum capabilities. This research seeks to work out how to minimize blow holes in the TIG welding process when depositing Stellite powder while maintaining other desirable qualities of the weld. In this respect, the work uses the OVAT technique and Taguchi design approach to analyze the effect of the major welding parameters, such as weld speed, feed rate and welding current, on the formation of blow holes. The research shows that it is possible to gain a remarkable increase in weld quality when the parameters mentioned are strictly controlled. In this systematic experimentation, the optimal welding condition found out was the welding speed of 6.5 rpm, feed rate of 120 mm/min, and welding current of 150A. With this combination, these parameters were determined to reduce the chances of blow-holes forming and increase the welds' quality and durability. With respect to the study objectives, the present investigation offers a clear direction to enhance TIG welding of valve seats with special reference to minimize the defects. Analysis done in the study shows that the welding parameters have the greatest impact in reducing the blow holes; the feed rate is 56.61%, weld speed is 22.28% and welding current is 20.17%. The results enhance weld quality, offering rules for eradicating imperfections in the TIG welding of valve seats, which is crucial for high-performance sectors.
Authors and Affiliations
Ravindra Karwande, Santosh Bhosle, Ashok Keche
Keywords
Related Articles
- EP ID EP752539
- DOI 10.52756/ijerr.2024.v45spl.006
- Views 12
- Downloads 1
Efficacy of Dry Needling in Enhancing Hand Function and Reducing Spasticity in MCA Stroke Patients: A Prospective Case Report
Stroke, particularly involving the middle cerebral artery (MCA), often leads to persistent disability, significantly impairing hand function and inducing severe spasticity in the forearm flexors due to complex motor path...
The Use of Ultrasonics for Stable Emulsion Preparation of Fir and Cedar Essential Oils
The properties of fir and cedar essential oils are very diverse. The main ones are antibacterial, anti-inflammatory, antifungal and antiviral. Furthermore, fir and cedar essential oils help to speed up metabolism and red...
A systematic review of workflow scheduling techniques in a fog environment
Various recent trends in computer science include machine learning, block chain technology, IoT, Cloud computing, etc. Fog computing is one of the research areas used everywhere in science or other fields. Due to it prov...
A comparison of the shear bond strength of metal orthodontic brackets that have been treated with various light-emitting diode intensities and curing times: In-vitro research
The study aims to test the effects of LED light at three different power settings (500mW/cm2, 1000mW/cm2& 1500m W/cm2) and three different exposure times (5sec, 10sec & 20sec) adhesive composites for use with stainless s...
Postural Assessment of Indian Excavation Workers and Prototype Design of Virtual Iron-Pan
The study was conducted among excavation labourers of the construction sites for five different tasks. Five postures were selected from the video recorded at the time of data collection. Analysis of static/dynamic work...