Improving energy efficiency of coal transportation by adjusting the speeds of a combine and a mine face conveyor
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 1, Issue 8
Abstract
<span lang="EN-US">The object of this research is the process that forms the weighted specific energy consumption for the transportation of rock mass by a coal face scraper conveyor at intensive coal mining under conditions of the non-uniform movement of a cleaning combine. The subject of this study is the regularities in the influence of uneven feed speed of a cleaning combine on energy indicators for the transportation of breakage face by a scraper conveyor under conditions of intensive coal mining. The aim of this work is to substantiate a technique to improve energy efficiency in the operation of the system "Cleaning combine ‒ mine face conveyor" under intensive coal mining conditions. We have statistically processed the results of experimental research into feed speed of the cleaning combine KDK500 at the eastern coal face No. 23 of deposit с<sub>11 </sub>at the mine "Yuzhnodonbasskaya" (Ugledar, Ukraine) of GP "Donetskugol", undertaken by the Institute "Dongiprouglemash" (Ukraine). We have constructed the structural and mathematical models of the process that enables the output cargo flow of breakage face and forms specific energy consumption for the transportation of rock mass by a coal face scraper conveyor. A mathematical model of the operating process takes into consideration the impact of the magnitude and non-uniformity of the feed speed of a cleaning combine on energy consumption at cargo transportation. We have established significant non-uniformity in the speed modes, in the productivity of a cleaning combine, caused by the mining-geological conditions and the nature of the technological process, by existing procedures for harmonizing the operational modes of mining and transporting equipment at breakage faces. The influence has been established of speed modes and efficiency of the combine on specific energy consumption for the transportation of cargo by a coal face scraper conveyor. The result is the high irregularity of a cargo flow both along a coal face and along further transport chain, which leads to a significant increase in energy consumption for cargo transportation. We have examined the effect of speed modes during operation of a combine, consequently its efficiency, on energy indicators for the process of coal transportation and the distribution of a cargo flow. It was established that increasing the feed speed of a cleaning combine and decreasing the speed of a scraper conveyor bring down specific energy costs for the transportation of discharged rock mass along a coal face</span>
Authors and Affiliations
Mykola Stadnik, Dmytro Semenchenko, Anatoly Semenchenko, Pavlo Belytsky, Svitlana Virych, Viktor Tkachov
Keywords
Related Articles
- EP ID EP666217
- DOI 10.15587/1729-4061.2019.156121
- Views 41
- Downloads 0
STUDYING PATTERNS IN THE FLOCCULATION OF SLUDGES FROM WET GAS TREATMENT IN METALLURGICAL PRODUCTION
The influence of a solid phase concentration in the model sludges of wet gas purification, as well as the flocculant consumption, on a change in the solid phase sedimentation rate and the strength of floccules has been e...
Research into aero acoustic characteristics of two-row impellers of the axial compressor
<p>We have conducted numerical simulation of current in the axial impellers with a single-row and a two-row geometrically equivalent blade crowns with a density of blade crowns over average radius of 1...2.5. The pressur...
Design of the composition of alkali activated portland cement using mineral additives of technogenic origin
<p>This paper reports results of the development of cement compositions and production technology for common cement systems "portland cement clinker – mineral additives – alkaline activator – water-reducing admixture", w...
Determining special features in the topography of paper with water marks at the micro and nanolevels
<p>We have studied the surface structure of tamper-proof paper with positive and negative watermarks at different scales ‒ from a micrometer to a nanometer level, by using the methods of contact profilometry and atomic f...
Investigating the influence of volumetric hydrophobization on the formation of phase composition of cement stone and its physical-mechanical properties
<p>We have examined the influence of the most widely used silicon-organic surface water repellent GKZH-11K on the physical-mechanical properties and the phase structure formation of cement is the fact that the introducti...