IMPROVING ENGINE OIL COOLING PERFORMANCE FOR VEHICLE USAGE
Journal Title: World Journal of Engineering Research and Technology - Year 2018, Vol 4, Issue 2
Abstract
This article provides the means of improving engine oil cooling systems in automobiles. The need for the improvement arises due to the frequent breaking down of automobiles as a result of congestion, temperature and nature of the Nigerian roads. In automobiles, the engine is either cooled by air using oil to air heat exchanger or by water using oil to water systems. For the engine to be cooled by air there must be sufficient air flow obtained at high speed. In order to provide solution to this problem, other method of cooling has to be used. Larger plate heat exchanger, Copper as heat exchanger material, additional radiator (oil to air) and a separate cooling circuit (water to air) were the examined factors adding to the cooling performance of the engine oil. Results from the simulation of this methods using Gamma Technology Suite (GTS) software shows that heat transfer rate above 26kW is achieved using any of the four methods. In the cause of this work, only the cooling system was considered.
Authors and Affiliations
V. M. Dagala
Keywords
Related Articles
- EP ID EP662247
- DOI -
- Views 179
- Downloads 0
MODIFICATION AND DEVELOPMENT OF A MANUALLY OPERATED AND MOTORIZED MELON SEED SHELLING/SEPARATING MACHINE
Melon shelling and separating/cleaning is usually done manually by hand in most part of the world. However, this method used to be time consuming and strenuous. To address such challenges, a machine for shelling the melo...
UNIQUE FEATURES AND APPLICATION OF ULTRA-WIDEBAND TECHNOLOGY
Ultra-Wideband (UWB) communication has been considered a revolutionary technology for transmitting large amounts of digital data over a broad frequency spectrum using short-pulse, low powered radio signals. UWB is an eme...
HARD EXUDATE DETECTION IN RETINAL IMAGES USING STATISTICAL PARAMETERS
Diabetic retinopathy (DR) is a major cause of blindness. Exudates are one of the primary signs of diabetic retinopathy, which is a main cause of blindness and can be prevented with an early screening process. Early detec...
PECULIARITIES OF SAMPLE PREPARATION FOR THE DETERMINATION OF CERTAIN MYCOTOXINS IN GRAIN PRODUCTS AND FRUITS BY IMMUNOBIOSENSOR ANALYSIS
Our current report focuses on effective ways of sample preparation for detection of mycotoxins aflatoxin B1 and T2 in grain products (wheat, maize, sunflower and oat) as well as patulin in fruits (plum, apple and grape)...
THERMOELECTRIC CONVERTORS AND INJECTION LASERS ON THE BASE OF MICROWIRES IV-VI AND V-VI
Owning to the miniaturization of solid state electronic devices, the problem of studying the physical and physicochemical processes in low-dimensional condensed systems, in addition to scientific interest, is of particul...