IMPROVING THE RELIABILITY OF POWER TRANSFORMERS OLTC DEVICES
Journal Title: Збірник наукових праць Українського державного університету залізничного транспорту - Year 2017, Vol 170, Issue 4
Abstract
It is established that one of the effective ways to improve the reliability of the power transformer as a whole is to increase the reliability of its on-load tap-changer (OLTC). As a result of the analysis of statistical material obtained under real operating conditions (the number of transformers is 1000 pieces, the observation period is 4 years), the failure statistics of its individual elements are given. It is shown that the most not reliable elements of the OLTC are the drive and the contactor. To improve the reliability of the OLTC, the possibility of its development on the basis of an engine with a rolling rotor is considered. A critical analysis of modern OLTC and the proposed technical solution is carried out. The technical and economic feasibility of developing and implementing a new device has been established. On the basis of the general theory of the electromagnetic field, a technique and an algorithm for calculating new sizes of an engine with a rolling rotor for OLTC of power transformers has been developed. The analysis of operational reliability of OLTC based on statistical materials is carried out; the main reliability indices of its elements are calculated. It is established that the introduction of a new technical solution will increase the reliability of the OLTC by 25% and the power transformer by 2-4%. The perspective of the development of a new OLTC device is presented.
Authors and Affiliations
Igor Khomenko, Elena Fedoseenko, Ivan Stasiuk
Keywords
Related Articles
- EP ID EP313838
- DOI 10.18664/1994-7852.170.2017.111280
- Views 65
- Downloads 0
ANALYSIS OF THE WORK OF CORPORATION "KRT" FOR IMPROVEMENT OF INTERIM CONNECTION RAIL SLIDING TYPE KPP-5
The analysis of the corporation "KRT" on improving intermediate rail fasteners KPP-5 type and history of the introduction of new structures such elastic fasteners on Ukrainian railways. Offered explanations on why the ch...
STUDY OF INTERACTION OF CLAY-CONTAINED MATERIALS BY INFRAREDSPECTROSCOPY METHOD
In the article a possibility of composition material creation is shown that contains clay soils and waste of produce. As the waste were used metallurgical slags and active sludge of biological treatment stations of urban...
DISPATCH CONTROL OF THE MOVEMENT AT THE DIFFERENTIATION OF THE CONSUMPTION OF TRAINS AT THE SITE
The paper shows that the main task in traffic management is security. The main dispatching management tool is the train schedule. From the correct planning of the site depends on the possibility of uninterrupted departur...
FORMING OF SPATIAL INFLEXIBILITY OF RAIL SUPPORTS AT RAILROAD TIES SB-3-0 AND FASTENING КPP-5
Аt action on the rail of forces vertical and lateral there is its bend in a plane vertical and horizontal and its twisting. The reactions of the rail fastening and reactive croutni vertical and horizontal are the constit...
REPAIR AND RECONSTRUCTION OF FACADES OF HISTORICAL BUILDINGS OF KHARKOV CITY
The article is devoted to the issue of repair and restoration of facades of historical buildings on the example of the city of Kharkov. The analysis of the latest researches and publications devoted to this issue is carr...