Improving Wastewater Effluent of Septic Tank Using Capillarity Action
Journal Title: IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) - Year 2018, Vol 15, Issue 1
Abstract
This study used simple modification of septic tank using capillarity action of different fabrics such as (cotton, nonwoven polyester, non-woven polypropylene geo-textile 300gm, non- woven polypropylene geotextile 800 gm. and filter labbad). Study results show that using cotton and non-woven polypropylene geo-textile 800gm improve the removal efficiency of septic tank to (97 % - 98 %) for TSS & (82%-83% )for BOD & (62% - 64%) for COD.
Authors and Affiliations
M. Helmy, M. El Nadi, T. Sabry, K. Hassan, O. Hamdy
Keywords
Related Articles
- EP ID EP437672
- DOI 10.9790/1684-1501016469.
- Views 56
- Downloads 0
Simulation-Based Building Envelope Design Optimization Methodologies for Indoor Thermal Comfort – A Review
Thermal comfort is defined as ‘that condition of mind which expresses satisfaction with the thermal environment’. One of the basic requisite of building is to provide comfortable indoor conditions to maintain good health...
Evaluation of Seismic Response Modification Factor of Multistory Buildings DesignedAccording to Egyptian Code
This study is mainly concerned with the calculation of the values of response modification factor at failure for idealized reinforced concrete moment resisting multistory frame systems designed according to the Egyptian...
Buckling analysis of single-layered FG nanoplates on elastic substrate with uneven porosities and various boundary conditions
In this investigation the buckling behavior of single-layered functionally graded nanoplates with uneven porosities exposed to hygrothermal loads is modeled for the first time. Using the Eringen’s nonlocal elasticity the...
Optimization of Distribution Network of Nigerian Bottling Company PLC Using LINGO
This research on Optimization of Distribution Network using LINGO was carried out in the Nigerian Bottling Company (NBC) which has many distribution centres all over the country. Three plants and twenty two warehouses wi...
Structural And Thermal Analysis of Aircraft Combustion Chamber Outer Case
The objective of this paper is to make a 3D model of the Combustion chamber outer case and study the structural and thermal behavior of the Combustion chamber outer case by performing the finite element analysis. SOLIDWO...