Increasing calculation accuracy in the design stage of a gas transportation system
Journal Title: Ovidius University Annals of Chemistry - Analele Universităţii "Ovidius" Constanţa. Seria chimie - Year 2013, Vol 24, Issue 2
Abstract
The paper presents a critical evaluation of the equations used to calculate the flow and pressure for transport pipelines. A highly accurate method for calculating gas parameters is proposed. The final part of the paper presents some comparisons between the proposed method and modern simulators used for the design of transport systems.
Authors and Affiliations
Sorin NEACSU , Renata RADULESCU
Keywords
Related Articles
- EP ID EP126102
- DOI -
- Views 72
- Downloads 0
Ways to improve conditions in mineral oil lubrication of the internal combustion engines
The paper analyses some phenomena affecting the cam-follower contact conditions, highlights some detrimental influences over the lubrication regime in this contact. The analysis of the theoretical model revealed the sign...
The framing of the raw materials used for manufacturing some rough ceramic materials into polinary oxide systems
In this paper it is presented the framing into polinary oxide systems in the case of optimal design of the oxide composition for obtaining raw ceramic materials. These calculations were carried out on two raw materials,...
[sup][/sup]Field testing of a magnesium oxide-lime-calcium chloride hydrochloric acid based filter
Field trials of a MgO-Lime-CaCl[sub]2[/sub]-HCl filter has been carried out to test the operation of the filter during actual user conditions. Water quality parameters like pH, TDS, Ca, Mg hardness, total alkalinity, SO[...
Mathematical model for power consumption at mixing of industrial and domestic wastewater sludge
Physical investigations have been carried out to characterize the power consumption in a laboratory autoclave vessel equipped with an anchor impeller (diameter d = 0.068 mm), without baffles, at 8 speed ratio, from 100 t...
Trace elements balance in a refinery
The trace elements balance is performed whenever the refinery processes a new type of oil. The goal of the balance is to find the distribution of the trace elements in the products and residues for the market. Also, the...