Increasing of efficiency of manual arc welding and surfacing of engineering products

Abstract

The data on the exothermic mixture amount in the electrodes coating influence on their heating and melting are given. Experimental methods found that exothermic reactions in the stage of heating and melting take place at the electrode coating contained more than 35% of the exothermic mixture. It is proved that when there is 58% of the iron scale in the electrodes coating as compared to electrodes containing the same amount of iron powder, the electrode melting rate is increased by 18 – 20%, the coating melting mass speed – 31 – 34% and the electrode melting coefficient – 11 – 14%. It is proved that the exothermic mixture adding (up to 53,4%) into the electrodes coating leads to effective efficiency heating increasing: basic metal (ηb.m.) from 0,715 to 0,815 and an electrode (ηe) from 0,28 to 0,415. The obtained results can be used in the welding electrodes performance improving development.

Authors and Affiliations

Anatolii Vlasov, Nataliia Makarenko, Denys Golub, Hanna Kushchii, Vitalii Titarenko

Keywords

Related Articles

Numerical modeling of complex two-level masstransfer in media of microporous particles taking advantage of the Crank-Nicolson method

Numerical solution for mathematical model of two-component diffusion in catalytic porous particles media has been proposed. The work is based on the results of previously proposed bi-porous model and considers diffusion...

Research of contact interaction of prestressed stamps, layer and foundation without friction

Solution to the problem of contact pressure of pre-stressed cylinder, layer and the foundation without friction is presented within linear elasticity theory. The research is presented in general terms for the theory of l...

Forming of characteristic curve of high pressure sodium lamp by electronic ballast

The problems of reducing the influence of high pressure sodium (HPS) lamp resistance variations during the lamp aging on lamp power taking advantage of electronic ballast with open-loop structure is considered. The four...

Analytical method for determining the stationary thermal fields in layered structures

The method of two-dimensional thermal stationary fields’ calculation in multilayer plates is proposed. Thermal fields are considered periodical along spatial value. The temperature of the upper and lower limits is descri...

Influence of boron on forming efficient structure of rolled steel and increase its technological plasticity at drawing

The features of the influence of alloying of boron on the structure and formation of complex qualitative indicators of rolled steel out high-carbon steels are showed. The mechanism of action microalloying boron additives...

Download PDF file
  • EP ID EP438061
  • DOI 10.33108/visnyk_tntu2018.03.046
  • Views 47
  • Downloads 0

How To Cite

Anatolii Vlasov, Nataliia Makarenko, Denys Golub, Hanna Kushchii, Vitalii Titarenko (2018). Increasing of efficiency of manual arc welding and surfacing of engineering products. Вісник Тернопільського національного технічного університету, 91(3), 46-55. https://europub.co.uk/articles/-A-438061