Increasing the accuracy of the non-contact temperature measurement in the case of energy audits of different objects
Journal Title: Технологический аудит и резервы производства - Year 2018, Vol 1, Issue 1
Abstract
<p><em>The object of research is the process of thermal inspection of enclosing structures with the help of a thermal imager. One of the most problematic places of thermal imaging energy is the presence of a significant methodological error. The reason for this is a large number of factors affecting the process of measuring the temperature of the surfaces of objects in thermal imaging diagnostics. In the course of the study, methods were used to analyze and isolate the factors that have the greatest effect on the thermogram of the investigated object.</em></p><p><em>Results are obtained on the evaluation of the influence degree of each influencing factor on the measurement result and the total methodical error from simultaneous influence of all influencing factors is estimated. The total methodical error of thermal imaging energy surveys (up to 4</em><em> </em><em>%) is estimated. This is due to the fact that the proposed methods for improving the accuracy of energy audit have a number of features, in particular, the result of energy audit largely depends on the experience and qualification of the operator. But the use of the proposed recommendations allows the operator to make measurements at a high professional level. Thanks to this, it is possible to improve the accuracy of the energy audit. In comparison with similar known energy audit methods, the proposed method makes it possible: to reduce the methodical error of thermal imaging energy surveys, to increase the energy efficiency of buildings and to reduce the cost of their heating.</em></p>
Authors and Affiliations
Grygorii Cherepashchuk, Evgeniy Kalashnikov, Alexander Nazarov, Vitalii Siroklyn
Development of the measurement method of porosity of bakery products by analysis of digital image
<p><em>Bakery products are an integral part of nutrition, so measuring their quality forms the conditions for a more stable operation of the enterprise. One of these indicators is porosity, which determines the structure...
Simulation of partial discharges under influence of impulse voltage
<p><em>The object of research is an equivalent circuit for a dielectric with a weakened insulation (for example, with a gas cavity) with a partial discharge. The test with partial discharge measurement by application of...
Development of reagents for protection of equipment of water supply systems from scale and corrosion
<p><em>The object of research is environmentally friendly water exchange systems in industry and utilities. At existing enterprises, in the process of modernizing water use systems, they often switch to the use of corros...
Development of a method for calculating the safe position of military units by using artificial neural networks based on swarm algorithms
<p class="a"><em>The object of research is development of a method for finding a safe position for military units in combat conditions, using swarm algorithms and neural networks. One of the most problematic places is th...
Study into energy efficiency of the drive of electric vehicles with an independent power supply depending on the configuration of the power source
<p><em>The electric vehicle with an independent power supply is the object of this research. At present, such vehicles are becoming more popular in the automobile market, pushing out their rivals with internal combustion...