Increasing the technical level of a torque flow pump by changing the geometry of a flowing part

Abstract

<p><em>The object of research is a pump of dynamic principle of action, namely a TFP «TURO» type (Switzerland).</em></p><p><em>The main TFP disadvantage is a lower value of the efficiency compared with centrifugal pumps. This is due to the peculiarity of their working process – the formation of a longitudinal vortex in the free chamber of the pump, the maintenance of which consumes part of the power consumed by the pump.</em></p><p><em>The analysis of a priori information indicates the expediency of using a change in the geometry of the flowing part of the pump as a means of influencing its pressure and energy characteristics. Extending the part of the blades of the impeller to the free chamber allows the combined working process (blade and vortex) to be used in the pump, which will increase the efficiency of the pump without losing the significant advantages inherent in this type of pumps.</em></p><p><em>Experimental impellers were made and a test was carried out on an experimental bench. The obtained results indicate the possibility of increasing the head and efficiency of the pump while maintaining the location of the optimal regime.</em></p><p><em>The nomenclature of quality indicators is determined, according to which the comparison of the created pump and the analog pump is carried out. The Harrington method (the «desired function» method) was chosen to determine the basic quality measure. The weight coefficients for quality indicators are determined and the integral indicator of the technical level of the created pump and analog pump is calculated.</em></p><p><em>The use of the SST model of turbulence for the numerical simulation of flow in the TFP flowing part is substantiated. Numerical calculation is performed and integral values of the pump are obtained.</em></p><p><em>The proposed design allows to create new pumping equipment with improved performance and a higher technological level, or increase the relevant indicators of existing equipment by making changes to the impeller design. These changes do not require significant costs and do not require the use of complex equipment and can be implemented directly at the site of operation by the company's own forces or the operating organization.</em></p>

Authors and Affiliations

Vitalii Panchenko, Aleksandr Ivchenko, Oksana Dynnyk, Olga Drach

Keywords

Related Articles

Development of software-based router model with adaptive selection of algorithms for queues servicing

<p class="20CxSpFirst"><em>The object of the research is the processes of managing resources of queues in network devices of telecommunication networks. </em></p><p class="20CxSpMiddle"><em>The one of most problem places...

Improvement of the procedure for integral assessment of the financial and corporate state of share-based societies

<p><em>The object of research is determination of the level of the financial and corporate condition of joint-stock companies. One of the most problematic areas is the identification of the level of available opportuniti...

Improvement of tax policy of territorial communities in the context of budget decentralization

<p><em>The object of research is the process of improving tax policy at the level of territorial communities, taking into account the specifics of fiscal decentralization. One of the most problematic places is the redist...

Research of the essence of social risk management

<p><em>The object of research is the essence of social risk management in terms of determining its main features. It is shown that the research object is multidimensional and consists of:</em></p><p><em>1) factors that i...

Development of the method of automatic determination of the speaker gender on the basis of joint evaluation of frequency moments of basic tons and formant frequencies

<p><em>The object of research is the methods of recognizing the speaker gender by means of speech signals. One of the most problematic places is insufficient knowledge of the choice of signs and decisive rules. This is n...

Download PDF file
  • EP ID EP527406
  • DOI 10.15587/2312-8372.2018.135773
  • Views 150
  • Downloads 0

How To Cite

Vitalii Panchenko, Aleksandr Ivchenko, Oksana Dynnyk, Olga Drach (2018). Increasing the technical level of a torque flow pump by changing the geometry of a flowing part. Технологический аудит и резервы производства, 3(1), 10-21. https://europub.co.uk/articles/-A-527406