Influence Analysis of Newly-built Channel Foundation Pit Under-passing High-Speed Railway Bridge on Adjacent Piers
Journal Title: Urban Mass Transit - Year 2024, Vol 27, Issue 3
Abstract
[Objective] When a new channel foundation pit under-passes a high-speed railway bridge, the excavation and unloading of the foundation pit will cause the displacement of the soil surrounding the bridge, and further affect the high-speed railway bridge. In order to ensure the operation safety of the high-speed railway line, it is necessary to analyze the influence of the foundation pit under-passing the bridge on the adjacent piers. [Method] With the project of the new channel foundation pit of Beijing-Hangzhou Grand Canal under-passing the Shanghai-Kunming High-speed Railway bridge as the background, based on finite element simulation and on-site measurement, the influence of foundation pit construction on the existing high-speed railway piers is analyzed. The feasibility and effect of the scheme adopting multiple rows of bored piles+inclined brace reinforcement for the foundation pit construction are evaluated. [Result & Conclusion] As the channel foundation pit construction causes horizontal displacement of the high-speed railway piers along the bridge, it is proposed to take proper measures to increase the stiffness along the bridge. The closer the bored pile is to the high-speed railway pier, the larger the horizontal displacement. With the construction of the channel foundation pit, the horizontal displacement of the bored pile shows the trend of increasing first and then decreasing. The displacement of piers under the reinforcement scheme of multiple rows of bored piles + inclined brace is less than the 2mm limit required by the relevant standard, meeting the requirements for train operation safety.
Authors and Affiliations
Xiaolong LI
Keywords
Related Articles
- EP ID EP732808
- DOI 10.16037/j.1007-869x.2024.03.034
- Views 73
- Downloads 0
Comparative Analysis of Calculated and Experimental Current Carrying Capacities of Rail Transit Aluminum Alloy Conductive Rails
Objective AAC (luminum alloy conductive) rails are widely used in rail transit power supply systems. However, a significant deviation often exists between the calculated and tested values of the permissible current carry...
Condition Assessment Method of Rail Welded Joint Equipment Based on Confidence Level
Objective To address the incomplete assessment system for seamless rail equipment conditions in China, it is necessary to establish an equipment condition assessment method for rail welded joints. Method The allowable de...
Types and Implementation Key Points of Expansion and Renovation for Urban Rail Transit Existing Lines
［Objective］ At present, some urban rail transit lines face significant mismatches between passenger flow demands and capacity supply. Capacity expansion and renovation is the common approach to enhance line transportat...
Analysis of Metro Flood Incidents During Operation and Suggestions for Emergency Management Informatization
Objective Once the metro flood incident occurs during operation, mild cases will cause train delay and even train suspension, while severe cases can result in property loss and worse, personal injury. Therefore, it is ne...
Research on Degraded Operation Scheme of Train Autonomous Control System Based on Vehicle-to-vehicle Communication
Objective As a new generation of train control system, the TACS （train autonomous control system）based on vehicle-to-vehicle communication is significantly different from CBTC (communication-based train control) in sys...