INFLUENCE DES TRAITEMENTS THERMOMECANIQUES SUR LES PROPRIETES DE L’ALLIAGE Al-6,2%Zn-2,5%Mg-1,7%Cu
Journal Title: Larhyss Journal - Year 2012, Vol 10, Issue 10
Abstract
The aim of this work is the demonstration of the effect of thermomechanical treatments on the properties of the alloy Al-6.2%Zn-2.5%Mg-1.7%Cu by thermal analysis techniques and calorimetry, which are methods of test widely used for research purposes and quality control. The effects of thermomechanical treatments on the two variables namely the coefficient of thermal expansion and heat capacity, we can provide further information for better understanding of the phenomena responsible for the thermodynamic behavior of the alloy. The results showed the one hand, there is great similarity between the linear coefficient of thermal expansion and heat capacity, and secondly the effect of plastic deformation is evidenced by changes in the shape of the curves from the rough. Similarly the kinetics of precipitation of η phase is accelerated in the case of samples homogenized and homogenized/distorted and accompanied by a shift in the temperature range to lower temperatures than those recorded in the case of the material state Gross.
Authors and Affiliations
BENSAADA S. | Laboratoire de recherche en hydraulique souterraine et de surface (LARHYSS) Université de Biskra, BP 145 RP 07000 Biskra Algérie, BOUZIANE M. T. | Laboratoire de recherche en hydraulique souterraine et de surface (LARHYSS) Université de Biskra, BP 145 RP 07000 Biskra Algérie, MOHAMMEDI F. | Laboratoire de recherche en hydraulique souterraine et de surface (LARHYSS) Université de Biskra, BP 145 RP 07000 Biskra Algérie
Keywords
Related Articles
- EP ID EP14951
- DOI -
- Views 372
- Downloads 17
THE USE OF A NEURAL NETWORK TECHNIQUE FOR THE PREDICTION OF SLUDGE VOLUME INDEX IN MUNICIPAL WASTEWATER TREATMENT PLANT
Modeling Sludge volume index of activated sludge process in municipal WWTP is a difficult task to accomplish due to the high nonlinearity of the plant and the non-uniformity and variability of influent quantity, qualit...
CONTRIBUTION A L’ETUDE NUMERIQUE DE L’ECOULEMENT SUBSONIQUE ET TRANSSONIQUE AUTOUR D’UN PROFIL D’AILE MINCE TYPE NACA 0006
The works allows to studying theoretically (numerical method + solver Fluent) the flow around the profile. Our attention will be principally takes on the description of the parallel and homogeneous flow. In the same co...
OPTIMISATION DU POSITIONNEMENT DES OUVRAGES DE CAPTAGE DANS LE DEPARTEMENT DE KATIOLA (CENTRE-NORD DE LA COTE D’IVOIRE)
The main objective of this research is to show how remote sensing and GIS can help to optimize the implementation of catchment works in base zone. Most of the groundwater resources is contained in the discontinuous aqu...
EFFECT OF SOME EXTERNAL PARAMETERS ON FRESH WATER QUALITY AND PRODUCTION BY SOLAR WATER DISTILLATION
In Algeria, as in developing countries, the problem of drinking water is becoming increasingly important, due to the population growth and rising living standards. Desalination of seawater and brackish water is now pos...
CONTRIBUTION DE L’HYDRAULIQUE MEDIEVALE DANS LA DYNAMIQUE URBAINE DU MAGHREB. CAS DE LA MEDINA DE TLEMCEN EN ALGERIE
In the mass of literature on the history of Tlemcen, the section reserved for water and medieval hydraulic techniques remains, despite the efforts made, very limited or marginalized. Of course, the socio-economic dynam...