INFLUENCE ESTIMATION OF SLIDING BEARING DETAILS OVALITY ON THE LONGEVITY ACCORDING TO GENERALIZED CUMULATIVE WEAR MODEL
Journal Title: Tribologia - Year 2013, Vol 251, Issue 5
Abstract
The solution results of contact problem and wear for sliding bearing under the existence of bush and shaft ovality are given using the express-method of calculations. Single-area and mixed schemes of interaction in the bearing are researched. The legitimacies of the influence of block size with constant contact conditions and discretization interval of shaft contour with ovality on the bearing longevity are determined. Besides, the influence of radial clearance on the bearing longevity is also researched.
Authors and Affiliations
Miron CZERNIEC, Jurij CZERNIEC
Keywords
Related Articles
- EP ID EP270043
- DOI -
- Views 35
- Downloads 0
Fenomen mechanizmu smarowania stawów człowieka
W opracowaniu przedstawiono problematykę związaną z wyjaśnieniem doskonałego mechanizmu smarowania stawów człowieka. Mechanizm ten do tej pory nie został w pełni opisany ani odtworzony w Endoprotezach lub innych węzłach...
ATTEMPT AT EVALUATING THE INFLUENCE OF BENDING STRESS ON SHAFT WEAR PROCESSES IN WATER LUBRICATED SLIDING BEARING WITH A RUBBER BUSHING
Water lubricated bearings find increasingly wide application in shipbuilding or the hydropower industry, with the popularity stemming from their numerous advantages. Unfortunately, as it turns out, water lubricated beari...
The mechanical properties of PVD coatings deposited on nitrided CoCrMo alloy
The paper concerns the evaluation of mechanical properties of the composite: ‘nitrided layer-PAPVD coating’ created on CoCrMo alloy intended for biotribological applications.<br/><br/>Five nitriding processes with varyin...
THERMAL ANALYSIS OF THE FRICTION PROCESS OF SLIDING BEARINGS USING A STATISTICAL APPROACH
During the friction processes in a sliding bearing complex, phenomena occur that are included amongst the most difficult and complex problems in tribological studies. Therefore, there is a need for a systematic applicati...
MECHANICAL PROPERTIES AND STATIC FRICTION COEFFICIENTS OF THE METAL-POLYMER COMPOSITE INTENDED FOR THE REGENERATION OF GUIDING SYSTEMS OF CUTTING TOOLS
The paper presents the results of strength tests and the static friction coefficient of chemical cross-linking, metal-polymer composites intended for the regeneration of guiding systems of cutting tools. A group of compo...