Influence of Different Opening Positions of Shield Method Connecting Passage on Main Tunnel Segment Internal Force
Journal Title: Urban Mass Transit - Year 2024, Vol 27, Issue 7
Abstract
Objective In the 9 m level large-diameter shield tunneling, there are no engineering cases using shield method for constructing connecting passages yet. Due to the influence of clearance and evacuation platform height, a certain eccentricity exists between the connecting passage and the main tunnel, resulting in the impact of shield launching and receiving with eccentricity for main tunnel structure. It is necessary to investigate the influence of different opening positions of shield method connecting passage on the internal forces of main tunnel segments. Method Based on a city railway project, numerical simulation method is used to analyze the mechanical response of main tunnel segments during the launching and receiving stages of above connecting passage construction under different eccentricity conditions. Result & Conclusion During the construction of shield method connecting passages, the most critical stage is when the thrust acting on the shield reaction frame is zero. As the eccentricity increases, the convergence deformation of special segments in main tunnel and the internal forces in steel and concrete segments gradually decrease, while the circumferential and longitudinal shear forces gradually increase. The internal forces in ordinary concrete segments adjacent to the special segments on the opening side also increase significantly, which requires special attention in structure design.
Authors and Affiliations
Meng ZHOU
Keywords
Related Articles
- EP ID EP742598
- DOI 10.16037/j.1007-869x.2024.07.014
- Views 8
- Downloads 0
Research on Embedded Track System Vibration Transmission
Objective Embedded tracks have relatively high damping, providing good vibration and noise reduction performance. Therefore, it is necessary to study the vibration reduction mechanism of embedded track system. Method Tak...
Characteristics of Lateral Aerodynamic Force Variation of 160 km/h Train Passing through Tunnels
Objective At a speed of 160 km/h, a certain EMU in China exhibits good stability when running on open tracks. However, when passing through single-track tunnels, the tail car experiences periodic lateral swaying issues....
Stress and Deformation Analysis of Green Prefabricated Slope Surface Protection Structure for Deep and Large Foundation Pit
Objective Excavation of deep and big foundation pit destroys the equilibrium state of the original stress field in the soil, leading to ground deformation. Foundation pit deformation can be controlled by adopting GRF (gr...
Analysis of Cracking Causes at Grounding Terminals of Bogie Axle-end and Resolution Measures
[Objective] Due to continuous changes in the operating conditions of metro lines, abnormal vibrations between wheel and rail s occasionally occur, leading to fractures in the suspension components at the bogie axle-end a...
Mapping Law of CRTS Ⅱ Type Slab Ballastless Track Static Deformation Due to Subgrade Horizontal Deformation
Objective Aiming at the insufficient control indexes for high-speed railway subgrade horizontal deformation currently, it is necessary to study the influence law and limit values of ballastless track subgrade horizontal...