Influence of dipping time on cracking during bending of hot dip galvanized coatings with Sn and Ti contents
Journal Title: Frattura ed Integrità Strutturale - Year 2010, Vol 4, Issue 14
Abstract
In the last years, the attention to environmental topics led a new approach solution in classical protection techniques, introducing innovative way oriented to optimize different coating properties. Hot-dip galvanizing is a classical process aimed to generate coatings on iron-based surfaces, used unchanged since 200 years: some chemical elements are added in the bath with different aims (e.g., Pb is really important for its fluidizing properties, sometimes replaced by Sn) but sometimes these elements are dangerous for human health (e.g. … Pb!). In this work, the influence of dipping time and coatings chemical compositions on damaging micromechanisms was investigated considering different Sn and Ti contents. Main damaging micromechanisms in hot dip zinc coated ipersandelin steel specimens were investigated by means of bending tests. Longitudinal sections of bended specimens were observed by means of a LOM (Light Optical Microscope): main damage micromechanisms were identified as longitudinal and radial cracks.
Authors and Affiliations
Vittorio Di Cocco, Laura Zortea
An analysis research of the stiffness characteristics of hospital building materials
This paper primarily aims to introduce different stiffness ratio requirements for hospital buildings of various structural styles, to achieve a new standard. The requirements of each stiffness ratio are analyzed,...
Numerical analysis of hydrogen-assisted rolling-contact fatigue of wind turbine bearings
Offshore wind parks at locations further from the shore often involve serious difficulties, e.g. the maintenance. The bearings of offshore wind turbines are prone to suffer hydrogen-assisted rolling-contact fatig...
Multiple and non-planar crack propagation analyses in thin structures using FCPAS
In this study, multiple and non-planar crack propagation analyses are performed using Fracture and Crack Propagation Analysis System (FCPAS). In an effort to apply and validate FCPAS procedures for multiple a...
Designing aluminium friction stir welded joints against multiaxial fatigue
The present paper investigates the accuracy of the Modified Wöhler Curve Method (MWCM) in estimating multiaxial fatigue strength of aluminium friction stir (FS) welded joints. Having developed a bespoke joini...
Estimation of stepwise crack propagation in ceramic laminates with strong interfaces
During the last years many researchers put so much effort to design layered structures combining different materials in order to improve low fracture toughness and mechanical reliability of the ceramics. It has&nb...