INFLUENCE OF HEAT TREATMENT AND DEFORMATION ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES Cu-Ni-Sn ALLOY
Journal Title: Journal of Mechanical Engineering Research & Developments (JMERD) - Year 2019, Vol 42, Issue 3
Abstract
This article present about studying on effect heat treatment and strain on mechanical properties of Cu-7Ni-7Sn alloy. This alloy is high elasticity alloy, advance characteristics of this alloy can obtain when associate heat treatment and deformation. The article ejected advance heat treatment and deformation behavior for its. Before processing hardness, strength, the elastic limit of this alloy have a small value. The hardness obtains about 90 – 95HB; the strength obtains about 200MPa; the elastic limit obtain about 100MPa.After heat treatment and deformation, hardness, strength, elastic limit of alloy ascend to multiple; the hardness obtains 294 – 302HB; the strength obtains 1000MPa; the elastic limit obtains 600 – 700MPa. This fact could explain by two mechanisms: deformation mechanism and spinodal transition. Deformation mechanism is to pull small grain lichen, increasing the strength of this alloy. Spinodal decomposition is a mechanism by which a solution of two or more components can separate into distinct regions (or phases) with distinctly different chemical compositions and physical properties. This mechanism differs from classical nucleation in that phase separation due to spinodal decomposition is much more subtle, and occurs uniformly throughout the material not just at discrete nucleation sites. The fineness of spinodal structures is characterized by the distance between regions of identical composition, which is of the order of 50 to 1000 Ao.
Authors and Affiliations
Nguyen Duong Nam
Keywords
Related Articles
- EP ID EP572325
- DOI 10.26480/jmerd.03.2019.102.105
- Views 64
- Downloads 0
COMPUTER-BASED STUDY OF PATTERNS IN FISH POND ECOSYSTEM EVOLUTION
There has to be a significant management effort, as well as climate change, to maintain the fish pond ecosystem. Thus, all possible variables are necessary to be taken into account. Based on mathematical model, implement...
A STUDY OF EMISSION & PERFORMANCE CHARACTERISTICS OF DIESEL ENGINE RUN BY DUAL FUEL (BIO DIESEL + ACETYLENE GAS)
This investigation targets on the effective production and utilization of vegetable seed biodiesel and their blends in a DI diesel engine. The investigations were carried out in single cylinder, water cooled DI diesel en...
MODELING AND ANALYSIS OF DISC BRAKE IN AUTOMOBILES
Brake system is the one of the most significant components in modern automobiles. Its duty is reducing the speed of the vehicle and stops it. Disc brake changes the kinetic energy of rotating parts (wheels) to the heat a...
OPTIMIZE AND ANALYSIS COMPRESSOR WHEEL OF TURBO CHARGER
Blade angle effect on flow field of the compressor wheel. Blade angle of compressor wheel will be analyses computationally by CFD. How the different blade angle of compressor wheel causes the effect on flow field along t...
APPLYING PHOTOELASTICITY WITH OPTICAL MAGNIFICATION METHOD TO INCREASE PRECISION OF DETERMINING FRINGE ORDER UNDER MONOCHROMATIC LIGHT
Photoelasticity method was used to measure strain and stress fields to address the precision problem of determining fringe order of loading and cracking and notch areas. In this study, microscope was used as an additiona...