INFLUENCE OF HYDRATED LIME ON THE PROPERTIES OF FILLER-BITUMEN COMPOSITE
Journal Title: Structure and Environment - Year 2015, Vol 0, Issue 2
Abstract
To guarantee the quality of warm mix asphalt, one of the prerequisites is to provide adequate adhesion between the bituminous binder and the aggregates. To achieve this goal, filler-bitumen mixes were examined with a replacement of mineral filler with hydrated lime in amounts of 0%, 10%, 20%, 30% and 40%. A 35/50 bitumen was used as a binder in the filler-bitumen mix in amounts of 4.8%, 5.1%, 5.4% and 5.8%. The assessed properties of filler-bitumen composite comprised: penetration, softening point and Fraass breaking point. The influence of the hydrated lime on the properties of the filler-bitumen compound was found to be significant and beneficial.
Authors and Affiliations
Mateusz Iwański, Kszysztof Maciejewski, Piotr Ramiączek
Keywords
Related Articles
- EP ID EP195311
- DOI -
- Views 107
- Downloads 0
NEW WAYS OF RENEWABLE SOURCES UTILIZATION FOR ELECTRICITY PRODUCTION
Nowadays, different solutions for increasing energy production are investigated in the world. One of the ways is utilization of renewable energy sources in cogeneration devices – combined production of electricity and he...
WAYS OF FORMATION OF ARCHITECTURE OF EDUCATION 'S NON-FORMAL INSTITUTIONS IN MODERN CONDITIONS IN UKRAINE
Ways of formation of architecture of education’s non-formal institutions in modern conditions in Ukraine are discussed in the article. The aim of the article is to describe some problems of architectural formation of non...
CEILING DAMAGE DUE TO SWELLING OF SLAG AGGREGATE IN TERIVA CONCRETE FILLER BLOCKS
The paper reports an example of damage to a Teriva floor slab system. The bottom section of the concrete filling block and the ceiling plasterwork broke away. No symptoms were observed to indicate excessive deformation a...
ACTION OF CHLORIDES ON CONCRETE ELEMENTS OF AN INDOOR SWIMMING POOL
The article presents the laboratory tests – based assessment of the condition of concrete elements in the indoor swimming pool. The test were performed on samples extracted from the swimming pool floor. The results from...
IMPROVING OF BOILER EFFICIENCY BY CONTROLLING THE HARMFUL SUBSTANCES CONCENTRATION IN THE COMBUSTION PRODUCTS
Chemical carbon level control is considered to be one of the simplest, cheapest and the most effective methods of optimizing fuel combustion. Standardized balance boiler’s tests show that maximum efficiency can be mentio...