Influence of kinematics of magnetic abrasive machining on the quality parameters of the working surfaces of high-speed steel
Journal Title: Вісник Житомирського державного технологічного університету. Серія: Технічні науки - Year 2018, Vol 81, Issue 1
Abstract
The influence of the kinematics of the process of magnetic abrasive treatment on the quality of work surfaces of taps with a profile angle of 60° is investigated. The influence of the conditions of the base of the taps in the working zone of the machine on the quality of the working surfaces is shown, and the presence of zones of «overlapping» of the teeth of the tool during its processing is experimentally confirmed. For p = 30° the machining takes place only on the cylindrical part of the teeth and on the cone. At p = 70° almost the entire profile of the cutting edge and the surface are processed. The roughness on the back surface after magnetic abrasive machining at p = 30° decreased by 35 %, and at p = 70° decreased by 10–25 %. This is due to the peculiarities of the interaction of the magnetic abrasive tool with the machined surface. The roughness on the front surface of all taps after magnetic abrasive machining decreased from Ra = 0.62 μm to Ra = 0.3–0.35 μm. The microhardness on the cylindrical part of the teeth after magnetic abrasive machining at p = 30° increased by 10 %, and at p = 70° decreased by 10 % which is connected with the appearance on the surface during the plastic deformation of the defects of the material of a thin surface layer and a partial imprint of fine dispersed carbides in the depth of the material.
Authors and Affiliations
D. V. Tarhan, V. S. Maiboroda, O. A. Plivak, H. H. Dobrovolskyi
Keywords
Related Articles
- EP ID EP305621
- DOI -
- Views 97
- Downloads 0
Analysis of existing methods for adjusting the norms of performance indicators of automobile transport enterprises
In this paper, the main methods of creating and modifying norms and standards for maintenance and repair of cars, which are expedient for use at automobile transport enterprises, are considered. Their significant advanta...
Computational analysis of the temperature improvement of electric asynchronal motors
In the development of electric machines as a whole, as well as asynchronous motors, in particular, the limit values of temperature are the key factors that affect the efficiency of the overall design. Since the usual loa...
UWB antenna system for mobile bearing finder of radio and television stations
This research discusses the problem of development and manufacturing of the ultra-wideband (UWB) antenna element and antenna system on the basis of such element for mobile bearing finder of radio and television signals w...
Method of automated detection of abusive content in social media text messages
The work provides the analysis of specifics of web users’ communication. Special attention is paid to the communication in social media and, in particular, to the problem of detection of abusive content in social media u...
About the influence of lubricating-cooling agents on the cutting process
Set forth problem of necessity of increase of workability of metal. On the basis of generalization of researches at the area of physics – chemical mechanics of materials the offered hypothesis on the permanent activating...