Influence of long-term heating on the fatigue properties of low-alloyed cast steel STN 42 2707
Journal Title: Production Engineering Archives - Year 2016, Vol 0, Issue 3
Abstract
In this paper the authors publish own experimental results of examination of low-alloyed cast steel STN 42 2707 fatigue properties (near- threshold regime of fatigue crack propagation for rates from da/dN =5.6x10-9m.cycle-1to da/dN =10-12 m.cycle-1 and Kath at da/dN =10-12 m.cycle-1) initial state and after long-term heating (T = 400 °C, t = 4000 hours ≈ 167 days) obtained at high-frequency loading (f ≈ 20 kHz, T= 20 ± 5 °C, R = -1). The long-term heating of material caused decrease of Kath and increase of fatigue crack growth rate in the near-threshold regime; then worse of low-alloyed cast steel STN 42 2707 fatigue properties.
Authors and Affiliations
Otakar Bokůvka, Michal Jambor, František Nový, Libor Trško
Keywords
Related Articles
- EP ID EP272067
- DOI -
- Views 81
- Downloads 0
Management aspects of the heating system work
The article discusses the problems of optimization and management of a centralized heating system. It characterizes the heating systems and the process of heat supply. The work focuses on identifying the components of th...
The influence of welded joint quality on safety 6 and reliability in operation
The quality of welded joint is an assumption of long-term reliability in operation. On the contrary, defective work of bad quality welded joint leads to fracture and crashes of plants. In this paper the authors state tha...
Development of road transport emission standards
Emissions from road vehicles are playing an important role in air quality which has a significant impact on human health. Pollut-ant emissions have to be precisely determined to ensure that air quality plans are designed...
INFLUENCE OF MODIFCATION ON THE REFINEMENT OF PRIMARY SILICON CRYSTALS IN HYPEREUTECTIC SILUMIN AlSi21CuNi
On the paper the influence of modifying micro additives on the refinement of primary silicon crystals in the hypereutectic AlSi21CuNi piston silumin have been examined. As the modifiers there were used micro additives of...
Importance of development factors in company dealing with cataphoresis coating method
The main aim of presented in this paper results is analysis of the most important factors in the company activity. The question-naire test were carried among persons employed by the company, which mainstream is method of...