Influence of Micro Glass Beads Added in a PBT Matrix on the Mechanical Properties of Composites
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2012, Vol 35, Issue 2
Abstract
This paper presents the influence of adding materials (micros glass spheres) in a matrix of PBT on several mechanical properties: elasticity modulus, stress at break , elongation at break, energy at break. The mechanical properties of these composites depend on the glass beads concentration. The additivation of polybuthylen therephtalate with glass beads increases the values of the elasticity modulus, but reduces quite drastically the elongation at break. Using the SEM investigation, the authors pointed out the particular aspects of fracture surfaces: a ductile process at sample margins and a brittle one in the middle of the composite.
Authors and Affiliations
Mihail BOTAN, Constantin GEORGESCU, Lorena DELEANU
Keywords
Related Articles
- EP ID EP619289
- DOI -
- Views 66
- Downloads 0
Behavior of Some Stainless Nitrided Austenite Steel Types to Corrosion and Abrasion
By nitriding, stainless austenite steel types can become surface hardened. Hardness can be greater at more than 1000 HV005 when the composition layer made of complex nitrides is obtained and more reduced till 500 HV005 w...
Influence of pH Galvanic Baths on the Nickel Deposits
The influence of pH on cathodic and anodic current efficiency, surface quality and morphology of nickel deposit in the electrolyte solutions of the Watts bath type was investigated. Cathodic current efficiency of nickel...
Studies About Electrochemical Plating with Zinc-Nickel Alloys
The electrochemical deposition of zinc and combinations with elements of the 8th group of the Periodic System (nickel, cobalt, iron) have good properties for anticorrosive protection, compare with pure zinc. For steel pi...
Researches Regarding the Rolling of the Sinterized Metallic Powders Strips
This paper work is distinguishing the size modification of those two material layers gotten by the bimetallic strip rolling, joined by the sintering. The iron powders sediment was achieved on the steel strip backing. Aft...
Research on the Corrosion Resistance, in Saline Solution, of Steel Sheets for Industrial Construction, by Gravimetric Method
In this paper, it was presented a study on corrosion in saline medium, by gravimetric method, of the steel sheets for industrial construction. The corrosion rate was estimated by gravimetric method and evaluate based on...