INFLUENCE OF NICKEL ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF ALUMINUM COPPER ALLOY
Journal Title: Journal of Mechanical Engineering Research & Developments (JMERD) - Year 2019, Vol 42, Issue 2
Abstract
This paper presents the results of Nickel component on the microstructure and mechanical properties of the aluminum-copper alloy. With the same heat treatment process (heated to 850oC quenching in water and tempering at 350oC in 2h) noticed: the sample was added nickel, it had phases of nickel with Al and Fe; these phases make sample’s mechanical properties better than the non-nickel sample. The samples were added Nickel, the hardness is higher than those without Nickel (105HRB and 92HRB). The abrasion results show that the Nickel alloyed samples also exhibited better than those without Nickel.
Authors and Affiliations
Vu Anh Tuan, Nguyen Duong Nam, Pham Ngoc Vuong, Mai Van Thi, Pham Mai Khanh
Keywords
Related Articles
- EP ID EP503672
- DOI 10.26480/jmerd.02.2019.84.86
- Views 72
- Downloads 0
EFFECTIVE TECHNOLOGIES OF DISSOLUTION OF ORGANIC DEPOSITS IN THE BOTTOMHOLE ZONE OF OIL WELLS REGISTRATION FORM
Article deals with problems of oil production on Kazakhstan`s fields. The necessity of search for more effective ways of restoring the initial permeability of bottomhole zone of the formation was established. The assessm...
FERROFLUID LUBRICATION OF A LONGITUDINALLY ROUGH ROTATING CIRCULAR STEP BEARING
This investigation tries to examine the effect of magnetic fluid lubrication on the behaviour of a longitudinally rough rotating circular step bearing resorting to the stochastic model of Christensen and Tonder. The magn...
DEVELOPMENT OF AN EFFECTIVE TECHNOLOGY FOR DEEP PURIFICATION OF WATER FROM SUSPENDED SOLIDS TO MAINTAIN RESERVOIR PRESSURE
Using for example Uzen oil and gas field, this article explores the peculiarities of oil production at fields located at the middle and late stages of development. Particular attention is paid to the need to pump water i...
INCREASING THE EFFICIENCY OF USE OF WHEELED TRACTORS WITH AN ARTICULATED FRAME FOR SECONDARY TILLAGE
The article in hand describes the design and the results of testing of the new device for redistribution of trailing weight between tractor axles and an aggregated agricultural machine. The use of this device for redistr...
PSEUDO ELASTIC METHODS FOR DAMAGE ASSESSMENT OF COMPOSITE TUBES
Rapid urbanization globally has led to increased traffic congestion within cities which often result in low speed collisions. These low speed collisions can happen during parking of Vehicles also. Bumpers provided for th...