Influence of plasma glow discharge on nitriding process of technical titanium
Journal Title: Journal of Achievements in Materials and Manufacturing Engineering - Year 2017, Vol 1, Issue 85
Abstract
Purpose: This article compares selected properties of surface layers produced by plasma nitriding. Additionally, the temperature at the onset of the production of surface layers with uniform characteristics over the entire sample surface was determined. Design/methodology/approach: The selected properties of the surface layers were compared using the following test methods: microhardness measurement by the Knoop method, GDEOS profile analysis, XRD analysis, topography analysis. Findings: It was found that nitriding in plasma glow discharge at 700°C results in obtaining homogeneous surface layers over the entire surface of the sample Research limitations/implications: The ion nitride processes did not allow a complete reduction in the oxygen content. Practical implications: The adopted plasma nitriding parameters will allow homogeneous properties of the surface layers over the entire surface of the sample to be obtained. Originality/value: The effect of plasma glow discharge on the properties of surface layers was determined.
Authors and Affiliations
M. Pilarska, T. Frączek
Keywords
Related Articles
- EP ID EP252314
- DOI 10.5604/01.3001.0010.7985
- Views 117
- Downloads 0
Indexes
Indexes
Laser treatment with 625 Inconel powder of hot work tool steel using fibre laser YLS-4000
Purpose: The purpose of this investigation was to determine the changes in the surface layer (Inconel 625), obtained during the laser treatment of tool-steel alloy for hot work by the use high-power fibre laser. Design/m...
Short-term creep and recovery behavior of medical grade ultra-high molecular weight polyethylene (UHMWPE)
Purpose: In this study, short-term tensile creep and recovery behaviors of medical gradeultra-high molecular weight polyethylene (UHMWPE) were investigated to contributedeformation behaviour of UHMWPE components in knee...
Improving the production of utility artistic products
Purpose: The purpose of this paper is evaluation quality problems in the production company by using chosen quality management tools like Pareto-Lorenz diagram and control card.Design/methodology/approach:...
The effect of laser treatment parameters on temperature distribution and thickness of laser-alloyed layers produced on Nimonic 80A-alloy
Purpose: The aim of this paper was to determine the influence of laser treatment parameters on temperature distribution and thickness of laser-alloyed layers produced on Nimonic 80A-alloy. Design/methodology/approach: In...