Influence of Some Technological Parameters of Fluidized Bed Carbonitriding on the Surface Hardness of Carbonitrided Parts from Low Alloy Steels
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2016, Vol 39, Issue 3
Abstract
The paper describes the experimental research of thermos-chemical treatment of carbonitriding performed on samples of different brands of low alloy steels. The technological parameters whose influence on the carbonitrided surfaces hardness was studied are thermo-chemical treatment temperature and the percentage of ammonia in the carbonitriding medium. Thermo-chemical treatments of carbonitriding have been carried out at low, medium and high temperatures. The investigations were conducted with three values for the ammonia percentage, which lead to different results for the surface hardness of the samples subjected to the investigations. The duration of treatment of two hours and thirty minutes, constant for all experiments performed, was chosen as the one commonly used in gas carbonitriding technologies.
Authors and Affiliations
Marian-Iulian NEACȘU, Sorin DOBROVICI
Keywords
Related Articles
- EP ID EP577085
- DOI -
- Views 64
- Downloads 0
Studies and Research on Pipe Networks Water Losses
The issue of water losses in pipe networks (transmission mains, conveyance and distribution pipelines) is one of the major problems encountered in water supply systems management. The losses have reached very high values...
The Assessing of Mechanical Characteristics of the Steel Sheets Designed for Drawing for a Five-Month-Period as an Effect of Natural Ageing
In the paper it is presented a study run on a five-month-period regarding the changes in the mechanical characteristics due to natural ageing for a drawing steel, cold rolled, unalloyed with 0.04% C. The ageing tendency...
Hardened Aluminum with Oxide Particles
The paper presents the effect of size and dispersion degree of the particles of aluminum oxide, on structure, mechanical characteristics and phenomena that take place when heating at different temperatures for recrystall...
Influence of Sintering Temperature on the Structure of the Yttrium Based Phosphor Nanoparticles
Yttrium-based phosphor materials belonging to the class known as garnets have witnessed a strong return with the development of the first white LEDs. Among these materials, yttrium aluminum garnet doped with cerium has b...
Influence of Cooling Oil on the Surface Quality of the Rolled Strip
The excess of emulsion used in the lamination process leads to the formation of drops which in the annealing process forms spots of burned emulsion. It was also shown to cause formation areas with high carbon concentrati...