Influence of Teeth Manufacturing Tolerances of Cylindrical Geared Wheels on GearOperating Characteristics Based on Spinner Stretching Apparatus
Journal Title: Fibres and Textiles in Eastern Europe - Year 2017, Vol 25, Issue 3
Abstract
In the paper, issues related to the errors and inaccuracies resulting from improper operation of the drive system of the stretching apparatus of a ring spinner are discussed. The aim of the paper was an analysis of a design solution for the driving system of a ring spinner and its operating behaviour influencing the quality parameters of the fiber jet. In the paper, modelling of the involute teeth shape by means of a BEASY package was done. Based on the model prepared, an assessment of the sensivity of geometrical teeth outline on particular dynamical quantities for the gear of the stretching apparatus was performed. An improvement in the parameters of operating of the spinner can be achieved via changing of the design characteristics of elements of the driving system; in particular, modification of the teeth shape was considered. Within the scope of the work, numerical analyses of the meshing geared wheels were conducted taking into consideration the unevenness of operating of the drive system as well as load distribution acting along the line of action. In the paper, the boundary element method was utilised for evaluation of the load distribution in relation to spectral analysis connected with the unevenness of the fibers’ jet mass.
Authors and Affiliations
Jacek Rysiński, Robert Drobina, Marek Praszkiewicz
Keywords
Related Articles
- EP ID EP199546
- DOI 10.5604/01.3001.0010.1702
- Views 94
- Downloads 0
Influence of Metal Fibre Content of Blended Electromagnetic Shielding Fabric on Shielding Effectiveness Considering Fabric Weave
There are few researches reported about the influence of the metal fibre content of blended electromagnetic shielding (EMS) fabric on shielding effectiveness (SE) under different fabric parameters. In order to scientific...
Measurement of Tensile Properties of Seersucker Woven Fabrics of Different Structure
asas<br/><br/>
Alternate Basic l/b-model of Effective Porosity Created for Hydrophilic (l) and/or Hydrophobic (b) Moist Textile Materials
There are several standard test methods (based on different construction mechanisms) and the respective experimental conditions (relative humidity, air velocity, test temperature) which lead to essentially different esti...
Directions of the Finishing of Fibres and Textile Development
The development of textile finishing techniques and technologies outside of reports in world-wide publications is also very visible at subsequent fairs. At international fairs, such as ITMA, ATMA and FESPA, machine, equi...
Antygrzybiczne mikrokapsułki z etylocelulozy uzyskane przez odparowanie rozpuszczalnika oraz ich zastosowanie dla preparacji tkanin bawełnianych
Zastosowano dwa antygrzybiczne farmaceutyki, terbinafinę i ketokonazol, wprowadzano do mikrokapsułek uzyskanych przez odparowanie rozpuszczalnika. Zastosowano dwa typy etylocelulozy o różnej lepkości. Mikrokapsułki badan...