Influence of the mean volumetric temperature of a thermoelement on reliability indicators and the dynamics of a cooler
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 1, Issue 8
Abstract
<p>The paper deals with the influence of the mean volumetric temperature of a thermo-element branch on the basic parameters, reliability indicators and the dynamics of operation of thermo-electric cooler under different temperature changes at the assigned heat load, geometry of branches of thermo-elements for specific current operation modes. It was shown that the mean temperature of the thermo-element, which is a reference point when calculating the energy performance of the thermoelectric cooler, can be used only for calculations in the stationary operation mode. Its use in the dynamic mode leads to significant errors. It was proven that the mean volumetric temperature of a thermo-electric branch can be such a reference point for a dynamic mode. The ratio for assessment of the mean volumetric temperature depending on the relative operating current was determined. The relationships between the mean volumetric temperature of a thermo-element, the time required to enter a stationary mode, the required number of thermo-elements, the differences between the mean volumetric and the mean temperature, and a cooling coefficient, depending on the relative working current, were analyzed. It was shown that at an increase in the mean volumetric temperature at the assigned current operation mode and a temperature difference, exceeding 40K, the magnitude of operating current, the number of thermo-elements, consumption power, failure rate and time constant decrease and cooling factor increases. The time for entering a stationary mode during the transition from the mode of minimum failure rate to the mode of maximum cooling capacity decreases by 5 %, while the failure rate increases by 16 %.</p>The practical significance of the conducted research is both to improve the quality of design of coolers and to select the necessary modes of thermo-electric system for ensuring thermal modes of electronic equipment depending on the importance of dynamic or reliability criteria of control
Authors and Affiliations
Vladimir Zaykov, Yurii Zhuravlov
Keywords
Related Articles
- EP ID EP666214
- DOI 10.15587/1729-4061.2019.154991
- Views 77
- Downloads 0
Studying the railroad track geometry deterioration as a result of an uneven subsidence of the ballast layer
<p>A method for calculating impairment of the track geometry under influence of dynamic loads in the course of passing the track unevenness by the rolling stock was developed. The method takes into consideration interrel...
Procedure for the synthesis of models of electrotechnical complexes
<p>A procedure for developing visual mathematical models of multichannel electrotechnical complexes which reduces time of synthesis of mathematical models and error likelihood was developed. The procedure includes two st...
Application of systems approach at early stages of designinng unmanned towed underwater systems for shallow water areas
<p>Typical configuration of an unmanned towed underwater system (UTUS) was described and advantages of using this type of marine equipment for shallow depth works were outlined.</p><p>A list of basic operating modes of t...
Studying the emissions from enterprises in the breadmaking industry in order to use them as additives to animal feed products
<p>We have investigated the concentration, physical properties and chemical composition of dust formed in the equipment at enterprises in the bread-making industry, depending on the character of production and a place of...
Synthesis of a trend’s integral estimate based on a totality of indicators for a time series data
<p>The need for a qualitative estimation of social processes, trends, and activities executed by social governing institutions has been considered. It was determined that the information openness, availability of process...