Influence of Thread Root Radius on Maximum Local Stresses at Large Diameter Bolts under Axial Loading
Journal Title: Analele Universitatii "Eftimie Murgu" Resita. Fascicula de Inginerie - Year 2014, Vol 21, Issue 1
Abstract
In the thread root area of the threaded bolts submitted to axial loading occur local stresses, higher that nominal stresses calculated for the bolts. These local stresses can generate failure and can reduce the fatigue life of the parts. The paper is focused on the study of the influence of the thread root radius on the maximum local stresses. A large diameter trapezoidal bolt was subjected to a static analysis (axial loading) using finite element simulation.
Authors and Affiliations
Vasile Cojocaru, Zoltan-Iosif Korka
Keywords
Related Articles
- EP ID EP459147
- DOI -
- Views 84
- Downloads 0
Computer-Aided Manufacturing of 3D Workpieces
Computer-Aided Manufacturing (CAM) assumes to use dedicated soft-ware for controlling machine tools and similar devices in the process of workpieces manufacturing. CAM is, in fact, an application technology that uses com...
Connection in Joints for Thin-Walled Steel Sections and Sheeting
Thin-walled cold-formed members are thin, this will give rise to behavioral phenomena, which are not usually encountered in the more familiar hot-rolled sections. When compared to hot-rolled steel sections, cold-formed t...
Experimental Generation of the Intersection Curve of Two Cylinders: An Algorithm Based on a New Paradigm
Computational Geometry is currently using approximation techniques based on convex polygons, with good results in some topics, but with severe limitation of applicability. In this paper we present the first step of a lar...
Effects of Pre-Treatment and Temperature on the Quality and Drying Rate of Tomatoes
The effect of pre-treatment and temperature on the quality and the drying rate of tomatos (Lycopersicon esculentus) were studied. A 3× 5 factorial experiment in a randomized complete block (RCBD) design was used. Firm an...
Tests Regarding the Transitory Regimes of Putting off Load of the Hydroagregate
For high power and high revolution aggregates it is required that the operation should take place in safe conditions, for all the running regimes. The most difficult regimes for a hydro aggregate are the transitory regim...