Influence of Weave Parameters on Woven Fabric Tear Strength
Journal Title: Fibres and Textiles in Eastern Europe - Year 2018, Vol 26, Issue 4
Abstract
The influence of weave on woven fabric tear strength is analysed in this paper. Brierlay’s factor Fm, Milašius’ factor P and P’ and modification of parameter P made by the authors (P’weft) were used in the investigations presented. Woven fabrics of 100 % viscose multifilament yarn manufactured from the same yarns and with the same density but with seven different weaves (plain weave, weft rib 2/2, warp rib 2/2, twill 2/2, twill 3/1, basket weave 2/2 and 4 healds sateen) were used for the investigations. It was stated that the well-known weave parameters of Brierley Fm and Milašius P and P’ cannot be used for the prediction of the tear strength of all kinds of weaves without any limitations. All parameters presented can be used for the strength prediction of a weave when they are divided into two groups – a rib-based group and twill-based group. Prediction of the tear strength for rib-based weaves in the weft has to be carried out using parameter P’weft, where the influence of parameters P1 and P is varied.<br/><br/>
Authors and Affiliations
Rimvydas Milašius, Brigita Legaudienė, Ginta Laureckienė
Keywords
Related Articles
- EP ID EP346848
- DOI 10.5604/01.3001.0012.1312
- Views 83
- Downloads 0
Tensile, Flexual, Impact and Water Absorption Properties of Natural Fibre Reinforced Polyester Hybrid Composites
In this paper, tensile, flexural, impact properties and water absorption tests were carried out using sisal/unsaturated polyester composite material. Initially the optimum fibre length and weight percentage are estimated...
Natural Modified Starch and Synthetic Sizes in Function of Characteristics of Sized Yarn
The aim of this study was to investigate the changes in properties of yarn made by sizing with synthetic and natural modified corn starch. Different procedures for obtaining modified natural (corn) starch and various co...
Photochromic Polypropylene Filaments: Impacts of Mechanical Properties on Kinetic Behaviour
Spiro [2H-indole-2,3'-[3H]naphth[2,1-b][1,4]oxazine],1,3-dihydro-1,3,3-trimethyl-6'-(1-piperidinyl) was incorporated onto polypropylene and photochromic polypropylene multifilaments produced through the mass coloration...
Advances in the Development of Antimicrobial Agents for Textiles: The Quest for Natural Products. Review
The antimicrobial finishing of textiles has attracted research attention lately due to demands for a healthy lifestyle. As a result, several synthetic and natural antimicrobial agents for textiles have been developed ove...
Vibrations of Elastically Supported Masses Separated by a Textile Layer
In this paper the problem of the transmission of vibration through a textile layer is presented. A mathematical model of a two degree of freedom system containing a textile layer and excited to vibrate by an electromagne...