Injection parameters optimization of crosslinked polymer flooding by genetic algorithm
Journal Title: Advances in Geo-Energy Research - Year 2018, Vol 2, Issue 4
Abstract
The crosslinked polymer flooding, which is developed on the basis of polymer flooding, is a new type of flooding technology. As an EOR method, cross-linked polymer flooding has become a research hotspot. In the process of cross-linked polymer flooding, if the concentrations of the polymer and the crosslinking agent are small, the viscosity of the solution is low, and it will not achieve the oil displacement effect. Meanwhile, if the concentrations of the polymer and crosslinking agent are large, the viscosity of the solution is high, it needs high pressure to drive it flowing in the formation. Further, with the increasing injection of chemical agents, the contradiction between reduced production and increased cost has presented. The performance of crosslinked polymer flooding depends on the interaction of these two factors. Therefore, the concentrations of polymer and crosslinking agent should be optimized. In this paper, an optimal design method is proposed by using genetic algorithm with global optimization characteristics algorithm, combining with the chemical flooding numerical simulation software UTCHEM, the concentrations of the chemical agents are optimized. Firstly, the cumulative oil production is calculated by numerical simulation software UTCHEM, then the concentrations of the chemical agents are randomly generated by the genetic algorithm in the encoding process, and the fitness function takes the profit of cross-linked polymer flooding. Given a set of initial values, through crossover and mutation of population, optimized injection concentrations of the polymer and cross-linking agent are obtained by the multi-generational calculation.
Authors and Affiliations
Peiqing Lian, Linlin Li, Taizhong Duan
Keywords
Related Articles
- EP ID EP527540
- DOI 10.26804/ager.2018.04.08
- Views 99
- Downloads 0
Nonlinear flow in low permeability reservoirs: Modelling and experimental verification
The low-permeability reservoirs are of heavy heterogeneity, low permeability, fine oil-water passages, strong resistance during flow, and the significant interaction between solid and liquid interfaces causes the flow of...
A comprehensive review of pore scale modeling methodologies for multiphase flow in porous media
Multiphase flow in porous media is relevant to amount of engineering processes, such as hydrocarbon extraction from reservoir rock, water contamination, CO2 geological storage and sequestration. Pore scale modeling, as a...
Insights on the gas permeability change in porous shale
Due to abundant nanoscale pores developed in shale, gas flow in shale presents a complex dynamic process. This paper summarized the effects from effective stress increase, shale matrix shrinkage, gas slippage and Knudsen...
A new algorithm for computation of horizontal-well pressure in Laplace domain
The effect of wellbore pressure drop on horizontal well pressure response is relatively important when flow velocity is high or the surface of horizontal wellbore is rough. The objective of this study is to develop a sta...
Experimental study on spontaneous imbibition chatacteristics of tight rocks
In the exploitation of tight oil and gas reservoirs, multi-stage hydraulic fracturing technology is mainly used and a complex system of fractures and matrix is formed after fracturing. In the process of field production,...