Integral Method Enabling the Determination of the Parameters of the Mayr and Generalised Mayr Models of Electric Arc Excited in the Circuit Using the Sinusoidal Current Source
Journal Title: Biuletyn Instytutu Spawalnictwa - Year 2017, Vol 61, Issue 1
Abstract
The article presents the primary properties of the Mayr mathematical models, the generalised Mayr model and the Pentegov model of electric arc as well as indicates the limited possibilities of the Mayr model in the accurate representation of arc dynamic characteristics in areas where current passes through the zero. The above-named difficulties can be eliminated using the generalised Mayr model. The article describes an integral method enabling the experimental identification of parameters of the generalised Mayr model and of the Mayr model of arc powered by a source having a sinusoidal wave. The above-named method was verified numerically by simulating processes in a simple electric circuit with macromodels of undisturbed arc.
Authors and Affiliations
Antoni Sawicki
Keywords
Related Articles
- EP ID EP261670
- DOI 10.17729/ebis.2017.1/6
- Views 48
- Downloads 0
Targeted Weld Seam Formation and Energy Reduction at Magnetic Pulse Welding (MPW)
Magnetic pulse welding is based on the high velocity impact of two joining partners and a promising technology especially for the joining of dissimilar metallic components. Under proper conditions, a solid-state bond for...
Robot-based Friction Stir Welding for E-mobility and General Applications
There is a fast growing market for friction stir welding applications in many industrial areas of transportation where the focus is on light weight. Along with the aviation, railway vehicle and shipbuilding industries, t...
Heat Treatment Effect on the Structure and Properties of Electron Beam Welded Joints Made of High-Alloy Titanium
The article presents the specific formation of a joint made of highstrength high-alloy titanium alloy (α + β) subjected to electron beam welding in vacuum. Tests involved the use of Ti-Al-Mo-V-Nb-Cr-Fe-Zr specimens obtai...
Microstructural Characteristics of Nickel Alloy Grade 600 After High-Temperature Thermal Cycle
Alloy grade 600 is characterised by high oxidation resistance at high temperature and resistance to stress corrosion. Because of the above-named characteristics, the alloy is widely used in the chemical and food industri...
Advanced Design and Verification of Tracks and Welding Positioners – External Axes of Robots
Multiaxial welding positioners and tracks intended for integration with an industrial robot as their external axes should be characterised by specific kinematic structure, the wide range of movements and high rigidity tr...