ІНТЕЛЕКТУАЛЬНИЙ КУТОВИЙ СЕНСОР ДЛЯ АНТЕННИХ СИСТЕМ ТА ЙОГО МЕТРОЛОГІЧНИЙ АНАЛІЗ
Journal Title: Вимірювальна техніка та метрологія - Year 2015, Vol 1, Issue 76
Abstract
The design and electron-optical scheme of intelligent opto-electronic sensor of absolute angular position are proposed. The sensor is completed by microconverter for data processing to implement the detection and compensation a number of errors that caused by mechanical nodes of rotating mechanisms. The principle of the operation of proposed angle sensor are based on the method of determining the absolute angular position using a code disk with one track. Pseudorandom code sequence of track is composed of different widths sectors. The code reading and processing is realised by means of two single-line photo-matrices located at the ends of the chord of the disk. The code sequence is constructed so that any fragment of sectors when projected on photo-matrix is unique and occurs only once in passing the code sequence on the disk. To accurately determine the angular position the algorithm of the sub-pixel processing image is used. It allows determine the distance to the edges of the sectors with resolution ability higher than half of the pixel width, that is equal of 2 micrometer. The resolution ability in the angle determination by sensor is increased to 16 bits. Due to the sensor design features, such as usage of two opto-electronic channels and software implementation of algorithms for processing information from photo-lines, errors caused by mechanical nodes of sensor via disk offset and eccentricity are minimized. Measuring at the proposed scheme also avoids the influence of random displacement sensor axis due to backlash in the bearings. The resolution ability of the designed sensor is 20 arcseconds. Based on simulation results and experimental studies metrological analysis of sensor and evaluation of error sources are given. Intelligent sensor in design and functionality was designing for the usage in control systems in particular in the pointing and tracking the antenna of the space communication systems with a narrow directional diagram.
Authors and Affiliations
Михайло Паламар, Андрій Чайковський, Анатолій Лупенко
Keywords
Related Articles
- EP ID EP198424
- DOI -
- Views 105
- Downloads 0
КОМП’ЮТЕРНИЙ МОНІТОРИНГ ВІТРОПОТЕНЦІАЛУ: КОНЦЕПТУАЛЬНИЙ ПІДХІД, СИСТЕМА ВІДБОРУ ПАРАМЕТРІВ ВІТРОВОГО ПОТОКУ
Conceptual approach to study of wind flow parameters computer monitoring has been created on the basis of the appropriate information program and the methodology for assessing the wind power. Structure of the monitoring...
КОМПЛЕКСНА МЕТОДИКА ОЦІНКИ ТЕРМІЧНИХ ПАРАМЕТРІВ ДІЇ ВОГНЕВОГО НАВАНТАЖЕННЯ НА ОГОРОДЖУЮЧІ КОНСТРУКТИВНІ ЕЛЕМЕНТИ ЖИТЛОВИХ ПРИМІЩЕНЬ
It is developed and practically approved elements of method of contact and noncontact estimation of thermal parameters of action of the fire loading on the non-load-bearing structural elements of housings apartments, wit...
ПРИСТРІЙ КОМПЕНСАЦІЇ ТЕМПЕРАТУРИ ВІЛЬНИХ КІНЦІВ ПЕРВИННИХ ТЕРМОЕЛЕКТРИЧНИХ ПЕРЕТВОРЮВАЧІВ
Had offered the device of compensation temperature of the thermoelectric converters free terminals with temperature dependent power source.
АКТУАЛЬНІ ЗАДАЧІ МЕТРОЛОГІЧНОГО ЗАБЕЗПЕЧЕННЯ ВИМІРЮВАННЯ ПОКАЗНИКІВ ЯКОСТІ ПРИРОДНОГО ГАЗУ
In the article the scientific, normative and technical bases of metrological assurance of natural gas quality parameters measurements are considered and analyzed. The methodology of it's improvement is proposed.
Ідентифікація номінально-статичної характеристики термоелектричного перетворювача
Determination algorithm of thermocouple differential thermoelectromotive force value using Pelletier effect is proposed in the articl.