INTERACTION BETWEEN THE CREATION OF A WHITE LAYER AND ADHESIVE REACTION IN CASE OF FRICTION OF ALLOY IRON IN HIGH TEMPERATURE
Journal Title: Tribologia - Year 2014, Vol 254, Issue 2
Abstract
The work characterizes the phenomenon of the formation of the “white layer” on the surface of tools used for the hot forming process of steel. It describes the structural factors of iron alloy tools that favour plastically hot-processed steel being glued to them. The work points to examples of a co-existence of the white layer and the glued steel. The mechanism of white layer formation was assumed as a factor favouring the adhesive connection of the tool and the hot-formed steel. The interaction between the austenitic micro-areas was indicated as the main cause of the adhesive connection under the mentioned conditions.
Authors and Affiliations
Janusz KRAWCZYK
Keywords
Related Articles
- EP ID EP263734
- DOI -
- Views 62
- Downloads 0
TRIBOLOGICAL RESISTANCE INCREASE OF CAST IRON CYLINDER BRUSH SURFACE LAYER WITH THE APPLICATION OF LASER ABLATION TREATMENT
Results of preliminary laboratory and technology tests of cast iron after laser modification are presented in the paper. In order to improve macro- and micro-geometry of the upper layer of cylinder sliding surface, a las...
Odporność oksydacyjna i właściwości smarne stabilizowanych roślinnych baz olejowych
Zastosowanie modyfikacji procesu oksypolimeryzacji oleju roślinnego z wykorzystaniem inhibitora Irgaoxu i/lub przedmuchu mieszaniny reakcyjnej gazem inertnym miało na celu uzyskanie stabilizacji właściwości otrzymanych o...
A TRIBOLOGICAL TEST RIG FOR FIBRES, CABLES, AND PLAITINGS
The paper presents a description of the mechanical construction, measuring and control systems and the possibilities of a new type tribological testing device. The design was developed and built at the Department of Fund...
INCREASING THE SERVICEABILITY OF FRICTION PAIRS BY APPLYING A:C:H AND A:C:H:W DLC COATINGS
The paper discusses the results of structural and tribological tests conducted for a:C:H and a:C:H:W DLC coatings deposited on Co- Cr-Mo specimens using the PACVD process. The structure and morphology of the Co-Cr-Mo sub...
WPŁYW MECHANIZMU TORSEN NA ZUŻYCIE OPON SAMOCHODOWYCH
Wśród układów napędowych 4WD wyróżnia się wiele konstrukcji mających na celu w optymalny sposób rozdzielać moment obrotowy pomiędzy osiami napędowymi. W tych układach niezbędne jest zastosowanie mechanizmów rozdzielający...