Investigate the Friction Drilling of Aluminium Alloys According to the Thermal Conductivity
Journal Title: TEM JOURNAL - Year 2013, Vol 2, Issue 1
Abstract
Friction drilling is non-traditional hole drilling method which uses the frictional heat due to the friction between a rotating conical tool and the workpiece to soften and penetrate the work-material and obtained a hole in a thin wall thickness material and at the result a bushing form. The selected spindle speeds were 1200rpm, 1800rpm, 2400rpm, 3000rpm, 3600rpm, and 4200rpm, feed rates were 25mm/min, 50mm/min, 75mm/min, and and100mm/min. Tool material was HSS which has 36o conical angle and 16mm cylindrical region length, workpiece materials were A1050, A6061, A5083, and A7075-T651 aluminium alloys which have different thermal conductivity coefficients and 4mm thickness. It was investigated the generated frictional heat, surface roughness, and bushing height according to spindle speeds, feed rates, and thermal conductivity coefficient of the materials. At the end it was discovered that with increasing thermal conductivity coefficients, the sufficient frictional heat was gained at the high spindle speeds and low feed rates. The greater bushing heights were obtained at lower spindle speeds and high feed rates. In friction drilling A5083, A6061, and A7075-T651 aluminium alloys, the optimum surface roughness were generated at 2400rpm and all of feed rates, which were used, the optimum surface roughness values were provided. Due to the high thermal conductivity coefficient of A1050 aluminium alloy the optimum surface roughness values were gained at 25mm/min and 2400rpm, at 50mm/min and 3000rpm, at 75mm/min and 3600rpm, 100m/min and 4200rpm feed rate and spindle speed couples.
Authors and Affiliations
Cebeli Ozek, Zulkuf Demir
Keywords
Related Articles
- EP ID EP151287
- DOI -
- Views 146
- Downloads 0
Technical Analysis of MOOCs
Lately, the globalization and massification of higher education offer involved more and more e-learning techniques inside universities. The article brings a perspective on our analyses of different trends in online...
SCORM Player WP7: a Software Solution for Review and Presentation of the Learning Content on Mobile Devices
The purpose of this paper is to present a software solution we have developed in order to enable download, review and presentation of the learning content on mobile devices. This Windows Phone 7solution, named SCOR...
Evaluation of Key Dependent S-Box Based Data Security Algorithm using Hamming Distance and Balanced Output
Data security is a major issue because of rapid evolution of data communication over unsecured internetwork. Here the proposed system is concerned with the problem of randomly generated S-box. The generation of S-b...
The Taxonomy of Corruption on the relation of Public corporation-Local community
There are many researches of corruption inpublic sector, especially in the health care and in the public management. But in public corporations that areimportant part of the public sector, it cannot be found. That...
Analysis of the Haulage Ropes on Ropeways in Case of Accidental Loads
The proven safe operation and the high availability of aerial ropeways is mainly thanks to their design. This is based on the manufacturer’s extensive experience as well as the strict application of the relevant ru...