Investigation of accuracy of methods of trigonometric levelling during the transmission of elevations over water surfaces
Journal Title: Геодезія, картографія і аерофотознімання - Year 2017, Vol 85, Issue 1
Abstract
Aims. The investigations of the transmission of elevations over water surfaces remain topical, so the first aim is to develop the technique of increasing the accuracy of the trigonometric instead of geometrical one. The second aim is to investigate the methods of trigonometric which can be used for the transmission of elevations over water surfaces with the use of modern devices. Methodology. Simultaneous and non-simultaneous reciprocal observations over different water surfaces have been carried out. The results of the trigonometric leveling carried out by different methods have been processed. Results. On the territories of training geodetic site in Berezhany city (Ternopil region) and urban settlement Shatsk (Volyn’ region) the activities directed to the creation of elevation geodetic base have taken place, including the investigations of the accuracy of trigonometric leveling during the transmission of elevation over the water surfaces. Vertical tie-in of geodetic datum has been done by the III class geometrical leveling. For determining heights on the investigated points, linear and angular measurements have been made with the use of automated tachymeters TPS 1201R Leica and TC 2003 Leica. According to the results of the observations on the geodetic site in urban settlement Shatsk, the comparison of the elevations obtained by the geometric leveling and trigonometric leveling by the methods “from inside”, “across the point”, “refraction basis” and non-simultaneous reciprocal leveling has been conducted. Balancing of the analytical network by a method of least squares has been done. According to the results obtained in Berezhany, the coefficients of vertical refraction along different directions have been computed and the comparison of elevations obtained from the III class geometric leveling and from the trigonometric leveling done by the method “from inside” have been conducted. The investigations of the accuracy of different methods of trigonometric leveling compared to III class geometric leveling have shown that they both generally meet the accuracy requirements of leveling on the flat grounds. Since the rough terrain has its peculiarities, some additional measured characteristics of the propagation of the axis of sight over different surfaces should be taken into account, for example, fluctuations of zenith distances determining atmosphere stratification or measured elevations. Scientific novelty. The application of non-simultaneous reciprocal trigonometric leveling over the water surfaces instead the III class geometric leveling on the paths under 1 km in length. Practical applicability. The possibility of replacing the cost-based geometric leveling with the trigonometric leveling without accuracy losses during the transmission of elevations over the water surfaces is shown.
Authors and Affiliations
S. Periy, I. Pokotylo, T. Korliatovych
Keywords
Related Articles
- EP ID EP483423
- DOI 10.23939/istcgcap2017.01.018
- Views 120
- Downloads 0
Special cases of the use of direct capitalization of income method in the evaluation of real estate
Purpose. An urgent solution to the problem is to overcome the impact of inflation to determine the value of the property. The purpose of research is to derive mathematical relationships for the transition of the economy...
Development and research of technology for automation of the calibration and account of digital SEM images geometric distortion obtained with JCM 5000 (NeoScope) (JEOL, Japan)
Purpose. Solids microsurface digital images obtained with scanning electron microscopes (SEM) are characterized by significant geometric distortions, which must be defined and taken into account when determining the quan...
Problems and prospects of estimating Earth deformation fields from geodetic data
Aim. Analysis of the current state of solving the problem the estimating of earth deformation fields based on continuum mechanics, improving traditional methods the estimating of horizontal deformations, definition an al...
A study of fractal and metric properties of images based on measurements data of multiscale digital sem images of a test object obtained
Purpose. The goal of this work is to establish and study the fractal and metric characteristics of images obtained with scanning electron microscopes (SEM). Methods. This approach is based on the processing of measuremen...
Update of topographic maps of Iraq, scale of 1: 50 000 using satellite image – ikonos
The aim is to find accurate, fast and economical way to update maps with information obtained by remote sensing data. There were all the necessary research to update the maps of the study area city of Kerbala (Iraq) scal...