INVESTIGATION OF CHANGES OF PHYSICAL AND CHEMICAL PROPERTIES OF TAP WATER UNDER INFLUENCE OF POWERFUL UNDERWATER SPARK DISCHARGES
Journal Title: Електротехніка і Електромеханіка - Year 2017, Vol 0, Issue 1
Abstract
Purpose. The purpose of this investigation is to study the changes in the redox potential and pH-value of the tap water as a function of underwater spark discharges, storage device capacitance and the charging voltage. Methodology. To define the electric parameters of discharge circuit we used the Rogowski loop and the compensated capacitance-ohm potential divider. To determine water properties before and after the treatment we used the following devices: the water analyzer Anion -7051 with the limit of absolute error of the EMF measurement ± 2 mV, the BANTE 902 device with the absolute error of ± 0.002 рН. Results. We managed to establish the time of the origination of changes in the properties of treated water. A change in the positive redox potential to a negative one occurred already after the third pulse at a total energy input of ≥ 1 kJ. The pH value increased in the range of 0.2 – 0.45 рН units. We obtained the relationship of a change in the redox potential as a function of total energy of the pulse train that actually exhibits the linear relation to the mass of erosion products. We established that the electrodes made of stainless steel and the electrodes made of graphite provide similar changes in water properties. An increase in pH is indicative of the progress of reactions that result in the formation of ОН‾. Originality. The obtained experimental data prove a rapid and reliable change in the redox potential from positive to negative changes in the redox potential exponent can persist during ten days and even longer. The erosion products of electrodes can be removed from the treated water using the method of magnetic separation. Practical value. The «HYDRA» plant can be used as the electrochemical ideal mixing reactor of a discrete action with the removal of erosion products of the electrode using the method of magnetic separation.
Authors and Affiliations
D. V. Vinnikov, K. V. Korytchenko, V. I. Tkachov, V. V. Egorenkov, T. Y. Mirnaya
A COAXIAL DISK SHUNT FOR MEASUREMENT IN THE HIGH-CURRENT CIRCUIT OF HIGH-VOLTAGE GENERATOR OF STORM DISCHARGES OF PULSES OF CURRENT OF ARTIFICIAL LIGHTNING WITH THE INTEGRAL OF ACTION UP TO 15•106 J/OHM
Purpose. Description of construction and basic technical descriptions developed and created in Research & Design Institute «Molniya» of the National Technical University «Kharkiv Polytechnic Institute» high-voltage high-...
APPROXIMATE CALCULATION OF ACTIVE RESISTANCE AND TEMPERATURE OF THE PULSE ELECTRIC ARC CHANNEL IN A HIGH-CURRENT DISCHARGE CIRCUIT OF A POWERFUL HIGH-VOLTAGE CAPACITOR ENERGY STORAGE
Purpose. To obtain calculation correlations for active resistance Rce and maximal temperature Tme of plasma channel of pulse electric arc in the air double-electrode system (DES) with metal (graphite) electrodes, and als...
A CALCULATION METHOD OF TRANSIENT MODES OF ELECTRIC SHIPS’ PROPELLING ELECTRIC PLANTS
The purpose of the work is to develop the method for calculating the transient modes of electric ships’ propelling electric plants during maneuver. This will allow us to evaluate and improve the maneuverability of vessel...
A COMPARATIVE ANALYSIS OF CONSTRUCTIVE SCHEMES OF LINEAR IMPACTOR ELECTROMECHANICAL CONVERTERS COMBINED TYPE
The concept of linear impactor electromechanical converter combined type with a single inductor excited by capacitive energy storage aperiodic pulse is proposed. The concept combines induction and electromagnetic convert...
A HIGH SENSITIVE MICROWAVE MEASURING DEVICE OF THE MOISTURE CONTENT IN THE NON-POLAR DIELECTRIC LIQUIDS BASED ON AN INHOMOGENEOUS STEP COAXIAL RESONATOR
Purpose. Objective is to create a moisture meter for non-polar liquid dielectrics with low volumetric moisture content of more than 10 3 %. Methodology. Moisture measuring is based on dielcometric method. It is implement...