Investigation of Natural Frequency Values of Composite Cover Design with Different Laying Angles
Journal Title: Engineering Perspective - Year 2022, Vol 2, Issue 4
Abstract
In this study, the effect of composite laying angle on the natural frequency values of a long and flexible cover made of laminated composite material was investigated. Investigation of the effect of the laying angle, a composite cover with rib design with the topgraphy optimization method was used. The cover design used in the study is an industrial design product and has producible features. A design with a total of 20 different laying angles has been made on the ribbed and ribless parts of the composite cover. Care was taken that the selected laying angles do not interfere with manufacturability. Designs with different laying angles are modeled with the ANSYS ACP module. The modal analysis of the created designs was carried out with the finite difference method in the ANSYS program environment. As a result of the modal analysis, natural frequency values of mode 1, mode 2, mode 3, mode 4, mode 5 and mode 6 of these designs were obtained. It was concluded that the best mode 2 natural frequency values (45°,-45°,45°,-45°,45°,-45°,45°) were obtained by using the degree of laying angles. In this design, mode 2 has a natural frequency value of 12.2 Hz, mode 3 33 Hz, mode 4 40.9 Hz, mode 5 57.8 Hz and mode 6 82.7 Hz. In this design, mode 2 has a natural frequency value of 12.2 Hz, mode 3 33 Hz, mode 4 40.9 Hz, mode 5 57.8 Hz and mode 6 82.7 Hz.
Authors and Affiliations
Mehmet Can Katmer, Adnan Akkurt, Tolga Kocakulak
Keywords
Related Articles
- EP ID EP720806
- DOI http://dx.doi.org/10.29228/eng.pers.66826
- Views 41
- Downloads 1
Autonomous Feed Pushing Robot Design and Manufacturing
The inability of animals to reach the food during feeding causes stress and may lead to a decrease in milk yield. At this point, adequate nutrition of animals in farms is very important in terms of milk yield. In this st...
Evaluation of Electrification of 4W Light Commercial Vehicle
Road transport is a prime contributor to CO2 emissions in the Indian transportation sector. The motor vehicle fleet in India is responsible for 90% of the total energy consumption in the transport industry and of this, 4...
Analysis of the Behavior of a Cross-Type Hydraulic Outrigger and Stabilizer Operating Under Determined Loads
In this study, behavior of a fully opened cross type hydraulic outrigger and stabilizer of an aerial ladder fire-fighting device which is on determined static load is analyzed. This hydraulic outriggers and stabilizer ar...
Investigation of Natural Frequency Values of Composite Cover Design with Different Laying Angles
In this study, the effect of composite laying angle on the natural frequency values of a long and flexible cover made of laminated composite material was investigated. Investigation of the effect of the laying angle, a...
Combustion, Performance and Emissions of Ethanol n-Heptane Blends in HCCI Engine
The aim of this study was to investigate the effects of the ethanol on combustion, performance and emission charac-teristics of a single cylinder, port fuel injection HCCI engine was investigated. 15% ethanol and 85% n-h...