Investigation of non-autoclaved foamconcrete beams reinforced with bamboo
Journal Title: Archives of Materials Science and Engineering - Year 2019, Vol 2, Issue 96
Abstract
Purpose: of this paper presents the experimental results of a study of strength and flexural behaviour of non-autoclaved foam-concrete beams reinforced with bamboo Design/methodology/approach: Six experimental samples of reinforced lightweight foamed concrete beams with hardened density D800 and D1200 with the same bamboo reinforcement were tested on lateral bending. Findings: A low level of anchoring of bamboo reinforcement in foam-concrete beams can provide their premature destruction. Research limitations/implications: Next experiments should be provided for improving the anchoring of bamboo reinforcement such as the bad adhesion between the bamboo and foam-concrete caused premature destruction of experimental samples. Practical implications: Replacement of steel reinforcement on the bamboo one in foam- concrete structures can be economical benefit. Originality/value: Increasing of experimental base leads to developing and creating new building standards in the nearest future.<br/><br/>
Authors and Affiliations
B. Demchyna, S. Lysiuk, Yu. Famulyak
Keywords
Related Articles
- EP ID EP599670
- DOI 10.5604/01.3001.0013.2387
- Views 78
- Downloads 0
Influence of loads in the process of laying on the resource of sea pipelines
Purpose: In the process of laying on the bottom of the sea material of the pipeline undergoes single-cycle alternating load. The purpose of the work is to determine the effect of pre-operational loads on...
Combined effects of strain and cooling path on hot deformation response and microstructure of low-carbon structural steel
Purpose: The aim of the paper is to analyse the effect of thermomechanical process with different cooling paths on microstructure and mechanical properties of low-carbon structural steel. Design/methodology/approach: The...
Recent advance in appliances and materials enhancing therapy of disorders of the stomatognathic system
Purpose: Dysfunctions of the stomatognathic system are treated with a lot of appliances. The aim of the work was to evaluate the current state in the field of diagnostic techniques and technological advance in appliances...
Parametric optimization of MIG welding on 316L austenitic stainless steel by Taguchi method
Purpose: Taguchi design has been adopted in order to identify optimal parametric combination for desired quality of weld. Design/methodology/approach: A plan of experiments based on Taguchi technique h...
An effective crack tip region finite element sub-model for fracture mechanics analysis
Purpose: To create an effective in engineering strength calculation three-dimensional submodel of the near crack tip region in solids for hi-fidelity analysis of their stress-strain state by the finite element method. De...