Investigation of the combination of ITO/CdS/CdTe/Cu/Au solar cells in microassembly for electrical supply of field cables
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 1, Issue 12
Abstract
<p>Studies aimed at optimizing the design of micromodules based on ITO/CdS/CdTe/Cu/Au photoelectric converters, which are used in autonomous power plants for field camps, have been carried out. To use photoelectric converters as power sources, they are combined into micromodules and modules. The nature of commutation of single solar cells in the microassembly significantly affects the output characteristics of the micromodule and, consequently, the efficiency of the photoelectric converter as a whole.</p>It is found that the series connection of the ITO/CdS/CdTe/Cu/Au PEC in the micromodule ensures its stability even if the output parameters of one or more single solar cells fail or deteriorate. If the composition of the micromodule includes a solar cell with significantly worse output characteristics, or there are several such elements, then when they are connected in series, the efficiency of the micromodule is several times higher than for a parallel cell. With the series connection of the ITO/CdS/CdTe/Cu/Au PEC in the micromodule composition, experimental samples of the micromodule with an efficiency of 5.3 % are obtained, which is almost 2 times higher than for parallel connection of the same PEC
Authors and Affiliations
Natalya Deyneko, Oleg Semkiv, Igor Khmyrov, Anton Khryapynskyy
Keywords
Related Articles
- EP ID EP527831
- DOI 10.15587/1729-4061.2018.124575
- Views 94
- Downloads 0
Forming the toolset for development of a system to control quality of operation of underground pipelines by oil and gas enterprises with the use of neural networks
<p>A set of defining parameters for modeling stages of a surface defect propagation in the outer surface of a metal pipeline taking into consideration fatigue strength has been formed.</p><p>For a section of a pipeline w...
Investigating the process of shrinkage depression formation at the combined radial-backward extrusion of parts with a flange
<p>The possibilities of using an energy method to forecast defect formation in the form of shrinkage depression in the combined extrusion processes have been investigated. We have proposed a mathematical model of the com...
Development of vehicle speed forecasting method for intelligent highway transport system
<p>Interaction of vehicles on an intercity highway is considered. The vehicle control model here is idealized, close to the 4th generation automated intelligent transport system. Each vehicle has the desired motion progr...
Studying the influence of production conditions on the content of operations in logistic systems of milk collection
<p>The algorithm of coordination of the content and time of operations execution in logistic systems of milk collection with manufacturing conditions was developed. The appropriateness of execution of eleven management o...
The role of fatty acid structure in various pure vegetable oils on flame characteristics and stability behavior for industrial furnace
<p>This study investigates the effects of the fatty acid composition of various vegetable oils on the behavior of flames in the combustion process. The research is important for the substitution of fossil fuel using envi...