Investigation of the relationship between depth of overhang and amount of daylight indicators in office buildings of Kerman city
Journal Title: Environmental Health Engineering and Management Journal - Year 2018, Vol 5, Issue 3
Abstract
Background: The use of daylight in offices has become an effective strategy to improve the quality of indoor space and energy efficiency. There is enough potential to have daylight autonomy in Kerman as a city with more than 300 sunny days a year. Therefore, this study aimed to investigate the relationship between facades configuration and the amount of daylight in office buildings of Kerman. Methods: This study was carried out based on the simulation in DesignBuilder software (DBS). In this study, 36 typical rooms, with the same physical characteristics (4 m×6 m×4 m), with window-to-wall ratio (WWR) between 10- 90% with four overhang depths (0, 0.5, 1 and 1.5 m) were modeled. Results: Based on daylight utilization, the results indicate that an optimal WWR for a room with 1 m overhang depth ranged from 50% to 70%. Also, the room with 0.5 m overhang depth and without overhang, had suitable daylight while WWR was at least 50%, but the room with 1.5 m depth would not encounter glare problem even when WWR was 90%. Conclusion: The results confirm that overhang depth and WWR have significant effect on daylight parameters such as daylight factor (DF), work plane illuminance (WPI), and WPI ratio. Hence, these insights can be useful for designers to design buildings with lower energy use and higher daylight quality, when enough light is provided in office rooms.
Authors and Affiliations
Ali Yazhari Kermani , Farshad Nasrollahi , Mohammadjavad Mahdavinejad
Keywords
Related Articles
- EP ID EP45336
- DOI 10.15171/EHEM.2018.18
- Views 393
- Downloads 0
Performance evaluation of the combined process of ozonation, biological activated carbon reinforced by bacterial consortium, and ultrafiltration in greywater treatment
Background: Background: Because of the growing population and increasing freshwater consumption, treatment and reuse of greywater have been widely considered. The application of a new and environmentally friendly treat...
Neglect of other health services during the corona crisis
This article does not have abstract
Chromium removal and water recycling from electroplating wastewater through direct osmosis: Modeling and optimization by response surface methodology
Background: Considering the carcinogenic effects of heavy metals, such as chromium, it is essential to remove these elements from water and wastewater. Direct osmosis is a new membrane technology, which can be a proper...
Effect of coagulation and sonication on the dissolved air flotation (DAF) process for thickening of biological sludge in wastewater treatment
Background: Dissolved air floatation (DAF) is one of the methods has been used for the sludge thickening in wastewater treatment plants. This study aimed to investigate the effects of coagulation and sonication process...
Assessment of heavy metals concentrations in the soil of Mongla industrial area, Bangladesh
Background: Contamination of soil with heavy metals is an alarming issue around the world. Therefore, this study aimed to assess the contamination status of heavy metals in the soil of Mongla industrial area, Bangladesh....