Investigation of Tribological Properties of Friction Pairs Duralumin – Fluoropolymer Used for Design and Manufacturing of Biomechatronic Devices
Journal Title: Tribology in Industry - Year 2017, Vol 39, Issue 2
Abstract
This paper deals with the processes occurring on the surfaces of materials during the interaction between metal and non-metal parts of various biomechatronic devices, such as prostheses, orthoses and exoskeletons. These mechatronic systems require careful selection of materials for design and manufacturing of their parts taking into consideration not only mechanical properties of the materials, but also their tribological characteristics. Friction pairs duralumin – fluoropolymer and stainless steel 100CrMn6 – fluoropolymer were chosen for the research as the samples. Experimental research was carried out with the use of the universal friction machine MTU-1. For this research, the scheme “plate-on-plate” was used without lubricants. Friction torque, friction coefficient and the temperature in the contact area versus the runtime were obtained as a result of the experiments. Furthermore, estimation of wear of contacting samples was performed. Analysis of the results allowed us to choose suitable materials for design and manufacturing of orthoses, prostheses and exoskeletons.
Authors and Affiliations
P . Kovalenko, S . Perepelkina, T . Korakhanov
Effects of Viscosity Variation and Surface Roughness on the Couple stress Squeeze Film Characteristics of Short Journal Bearings
The theoretical analysis of the combined effects of surface roughness and viscosity variation on the couple stress squeeze film characteristics of short journal bearings is presented. The modified stochastic Reynold’s eq...
Investigation of Action Mechanism of Additives from Mineral Raw Materials
The structural changes of friction surfaces and assosiated changes of main tribological characteristics (coefficuient of friction, weight wear) taking place as a result of introduction of additive into the lubricating oi...
Development of Aplication for Analysis of Machinability Index
Rapid development of new materials, cutting tools and cutting fluids promote research of machinability for new materials and tribological characteristic of cutting tools and cutting fluids. Material machinability is very...
Epoxy Resin Based Composites, Mechanical and Tribological Properties: A Review
High fuel consumption by automobile and aerospace vehicles built from legacy alloys has been a great challenge to global design and material engineers. This has called for researches into material development for the pro...
Failure Mode and Effect Analysis of Active Magnetic Bearings
In the present research work Failure Mode and Effect Analysis (FMEA) of an Active Magnetic Bearing (AMB) has been presented. Various possible failures modes of AMBs and the corresponding effects of those failures on perf...