INVESTIGATION OFINDIUM (III) SULFIDE THIN FILMS PROPERTIES OBTAINED BY CHEMICHAL BATH TECHIQUE
Journal Title: Хімія, технологія речовин та їх застосування - Year 2018, Vol 1, Issue 1
Abstract
Due to its unique optical and electrical properties semiconductor metal - sulfide and metal – selenide thin films can be used in photovoltaic systems. The largest using acquired CdS films. But due to its toxicity, there is considerable interest in replacing CdS other semiconductor films with similar or even better properties obtained by chemical bath deposition (CBD). One of the promising candidates for replacing cadmium sulfide is chemically deposited film indium sulfide. In this paper were reviewed and analyzed the main aspects of synthesis indium sulphide thin films by CBD. Attention is focused on choosing a method of chemical deposition due to the simplicity of its execution in technological term, possibility of the using different initial substances for the synthesis wide range of semiconductor thin films at temperatures up to 100ºC. The basic conditions synthesis thin films were analyzed. Examined their impact on the phase composition, optical and morphological properties of the films. In3+ ions donor are the salt of indium chloride (InCl3×4H2O) or indium sulfate (In2(SO4)3), donor S2- is thioacetamide (TAA, CH3CSNH2). In all cases, stated that the experiments were carried out in a strongly acidic environment (pH = 1 - 2.5). The acidic environment created by using a solution of sulfuric acid. Acetic or citric acid added as complexing agents. The synthesis of thin films was carried out pre-prepared substrate. In the majority of synthesis methods as a substrate serves glass or it’s different modificatios: Pyrex (borosilicate glass), fluorine doped tin oxide (FTO) coated glass, systems glass/SnO2, glass/Cu3BiS3, ITO/glass, in some cases - polymers. The glass substrate washed with a chromic mixture, then washed by distilled water and dried for 10-15 minutes. The temperature of the working solution in the range of 50 - 90°C. The film thickness directly proportional to the deposition time and is highly depend on the nature of the substrate and pre-processing. In studying of the structure indium sulfide thin films was fixed the presence of phase β-In2S3, after annealing the samples, on diffractograms new phase In6S7 was observed. Conditions for obtaining and properties of indium sulfide thin films in are consolidated in table. Investigations results of physical and chemical properties of the films were summed up. Highlighted optimal conditions for chemical bath deposition films of indium sulfide depending on the nature of the substrate and the method of preparation. Particular attention is paid to the analysis, comparison physical and chemical properties of films according to the synthesis conditions.
Authors and Affiliations
R. I. Hlad, Ruslana Guminilovych, P. Y. Shapoval, Vitalii Stadnik, Y. Y. Yatchyshyn
Keywords
Related Articles
- EP ID EP525298
- DOI -
- Views 52
- Downloads 0
SYNTHESIS OF NEW1,5-SUBSTITUTED TETRAZOLES BASED ON N-BENZOYL-N’-(9,10-DIOXO-9,10-DIHYDRO-ANTHRACENYL) THIOUREAS
New 1,5-substituted tetrazole derivatives were obtained by reaction of early synthesized N-benzoyl-N’-(9,10-dioxo-9,10-dihydroantracene-1-yl) thioureas with sodium azide at room temperature in DMF and presence of triethy...
TERMODYNAMIC PROPERTIES OF 2-CYANO-3-[5-(2-OXY-METHYL-4- NITROPHENYL)-2-FURYL]-2-PROPENAMIDE
2-Cyano-3-[5-(2-oxy-methyl-4-nitrophenyl)-2-furyl]-2-propenamide is a biologically active derivative of furan with reactive centers of donor and acceptor type that is used as a starting material in the synthesis of drugs...
INVESTIGATION OFINDIUM (III) SULFIDE THIN FILMS PROPERTIES OBTAINED BY CHEMICHAL BATH TECHIQUE
Due to its unique optical and electrical properties semiconductor metal - sulfide and metal – selenide thin films can be used in photovoltaic systems. The largest using acquired CdS films. But due to its toxicity, ther...
KINETICS OF GRINDING FOR CEMENT CLINKER USING NEW INDUSTRIAL GRINDING AIDS
Grinding aids (GAs) for cement clinker milling is used to reduce the energy required to achieve a given degree of cement powder dispersion. Some products in the GA, commonly referred to as performance enhancers, have a p...
СИНТЕЗ НАПІВПРОВІДНИКОВИХ ТОНКИХ ПЛІВОК ЦИНК СУЛЬФІДУ І ЦИНК СЕЛЕНІДУ. ОГЛЯД
The zinc sulfide (ZnS) and zinc selenide (ZnSe) films of belongs to the AIIBVI group of semiconductors type, which are the main part of photosensitive elements of electronic devices. An analytical review of the scientifi...