Investigation on lineworks printed with different types of flexographic printing forms for purposes of printed electronics
Journal Title: Challenges of Modern Technology - Year 2015, Vol 6, Issue 3
Abstract
Nowadays one can observe fast development of materials and technologies dedicated to inexpensive mass production of electronic devices with conventional printing techniques. One of them is flexography. In this paper investigation on quality of lineworks printed with flexographic printing technique for purposes of printed electronics is presented. There was analysed influence of different printing forms on printed elements reproduction accuracy. Results obtained with conventional graphic ink with commercially available conductive ink were compared as well. Aspects which should be taken under consideration when implementing flexography to printed electronics applications have been specified.
Authors and Affiliations
Juliusz Krzyżkowski, Tomasz Dąbrowa, Jacek Hamerliński, Przemysław Śleboda
Keywords
Related Articles
- EP ID EP203132
- DOI -
- Views 86
- Downloads 0
Cosmetic Wastewater Treatment Using Coagulation and Fenton Processes
The cosmetic wastewater was treated by coagulation and Fenton process. COD of raw wastewater was 2888 mg/l. The effectiveness of these processes, defined as a decrease of COD was 66.4% for coagulation for a FeCl3 dose 90...
Acquisition of databases for facial analysis
This article describes guidelines and recommendations for acquisition of databases for facial analysis. New devices and methods for both face recognition and facial expression recognition are constantly developed. In ord...
Polymer Injection Molding: Advanced Simulations or Tablet Computations
Simulation of injection molding of polymeric materials is a common way of solving issues in plastic part and injection mold design. CAE software is getting more available and user-friendly, which sometimes leads to unrea...
Magnetocaloric effect in Ni-Mn-X Heusler alloys
Effect of replacement of Ga by Sn for two Ni-rich Heusler alloys series: Ni50Mn25+aX25-a (a=0; 2.3; 4.2; 5.8; 7.15; 8.35), with X= Ga, Sn, and its influence on the magnetocaloric properties of the alloys, were studied. T...
Application of Voronoi diagrams in contemporary architecture and town planning
Modern design methods rely increasingly on understanding the nature of processes and principles of self-organization of biological structures and their representation using mathematical models that may apply in technolog...