INVESTIGATION OPTICAL FIBER BY DIGITAL HOLOGRAPHIC INTERFEROMETRY METHOD
Journal Title: Вісник Національного університету "Львівська політехніка", серія "Радіоелектроніка та телекомунікації" - Year 2014, Vol 796, Issue 2014
Abstract
The purpose of this paper is investigation the possibilities of applying methods of digital holographic interferometry to study the internal structure of the optical fiber, including the distribution of the refractive index in the cross -section. Modern development of micro-and nanotechnology requires the development of new approaches and methods for the diagnosis properties of mediums and objects, and research processes and structural changes that are taking place under the influence of external factors. In particular, diagnosis and metrology are important in the field of fiber technique since it is known that increasing the density of information that is transmitted through the optical fiber requires their micro- and nanostructuring. Optical microscopy is the classical method studying of the micro- and nanoscale mediums, phenomena and processes. However, main disadvantages are limitation of the spatial resolution due to diffraction effects, and the inability (or technical complexity) 3D imaging of phase microscopic objects. The coherent-optical methods including methods of holographic interferometry received the high actuality with the appearance of the coherent radiation sources which are the most promising tools for experimental investigation of the materials characteristics and properties of the phase and diffuse macro- and micro objects. At the same time, application of the holographic interferometry to study microscopic objects is only possible at combining it with classical microscopy. This combination allows produce the qualitative and quantitative diagnosis with a high sensitivity and precision as well as achieving image magnification. Indicated disadvantages will be disappeared when holographic interferometry and classical microscopy will be combined. This combination allows produce the qualitative and quantitative diagnosis with a high sensitivity and precision as well as achieving image magnification. In this work method of digital holographic interferometry to research the phase microobject are presented. Model of holographic interference microscope with a digital recording of holograms and receiving interferogram by subtracting two video signals has been developed. Technique investigation the distribution of refractive index in optical fibers has been developed. Experimental results of the distribution of the refractive index in the optical fiber are presented. It is shown that the sensitivity of the developed digital interference microscope depends on the characteristics of CCD and microscope zoom.
Authors and Affiliations
H. Petrovska, V. Varyshchuk, V. M. Fitio
Keywords
Related Articles
- EP ID EP459754
- DOI -
- Views 166
- Downloads 0
THE ALGORITHM OF SENSOR NETWORK LIFETIME MAXIMIZATION USING THE CONCEPT OF VIRTUAL NODES
One of the main problems of the requirements of quality of service of wireless sensor networks is to provide fault tolerance. Based on research on energy nodes and routing data, efficiency is paramount to increase the li...
IMPROVING THE QUALITY OF SERVICE IN MULTISERVICE NETWORKS BY INTEGRATING TECHNOLOGIES IP / MPLS AND DWDM
IP traffic is growing and seting new tasks for improving the quality of telecommunications services. To resolve this problem in this paper has been proposed IP over OTN over DWDM network architecture, which peculiarity i...
ACCURACY OF DETERMINATION OF TWO DYNAMIC MICROOBJECTS PARAMETERS WITH TELEVISION SCANNING OPTICAL MICROSCOPE
At the present stage of technological development there are more problems associated with micro- and nanotechnology. Among such problems occupy an important place task analysis of dynamic processes and several dynamic mi...
ADAPTIVE ALGORITHM OF MOVING OBJECTS DETECTION IN VIDEO MONITORING
The paper based on the analysis of existing methods of detecting moving objects offer combined detection algorithm that adapts to such destabilizing factors as: the noise of the equipment (photoelectron matrix converter,...
DEVELOPMENT THE PROCESS OPTIMIZATION METHOD OF MANUFACTURING THE RADIO-ELECTRONIC EQUIPMENT WITH USING OPTIMIZATION PARETO-REGIONS
At the department of theoretical radioengineering and radiomeasurements of Lviv Polytechnic National university the theory and methods of modeling and a process optimization the quality assurance processes of the radio-e...