Joint Geometry Indications in Conventional Ultrasonic Tests and Phased Array Tests
Journal Title: Biuletyn Instytutu Spawalnictwa - Year 2017, Vol 61, Issue 2
Abstract
The article presents issues concerning the formation of root geometry indications in conventional ultrasonic tests and in the Phased Array tests. In addition, the article describes the manner enabling the verification of sources of indications allowing their proper classification both in classical and Phased Array tests. The article contains results of T-joint-related tests performed using the Phased Array technique and depicting the scale of geometry indications when testing welded joints. The article is addressed to NDT personnel performing ultrasonic tests.
Authors and Affiliations
Karol Kaczmarek
Keywords
Related Articles
- EP ID EP269769
- DOI 10.17729/ebis.2017.2/6
- Views 75
- Downloads 0
Evaluation of the Effectiveness of High-Density Couplants in Ultrasonic Tests
The article presents the analysis of the effectiveness of acoustic feedback required in ultrasonic contact tests. The analysis included high-density couplants, the use of which aimed to provide the most effective transfe...
Recent advances in fiber laser welding
Fibre lasers are innovative tools in the welder’s hands. The continuous development of fibre lasers combined with newly developed welding techniques enable the performance of technological tasks extremely difficult or ev...
Assessment of Macro and Microstructure of Welded Joints Made of Steel P265GH Using Various Combinations of Welding Consumables
The article presents the assessment of the macro and microstructure of welded joints made in steel P265GH using various combinations of filler metal wires and shielding gases. In addition to microstructural analysis, tes...
Robotic Arc Surfacing in the Additive Technique-Aided Creation of Models
Previously used reconditioning of worn machinery parts based on welding methods, primarily arc surfacing and thermal spraying, enabled the restoring of nominal shapes and dimensions as well as other parameters and functi...
Hardening Surfacing with Flux-Cored Wire Increasing the Service Life of Rotating Discs of Defiberiser for Mineral Wool Production
The article discusses the MAG method-based surfacing of discs of a mineral wool defiberiser performed using self-shielded arc and submerged arc. In addition, the article presents results of tests concerning the service l...