کاربرد روش سطح پاسخ براي مدل‌سازي و بهينه‌سازي فرايند انعقاد در حذف يون برومايد
Journal Title: آب و فاضلاب - Year 2016, Vol 27, Issue 5
Abstract
Application of Response Surface Methodology (RSM) for Modeling and Optimizing Coagulation Process for the Removal of Bromide Ions In this paper, the response surface methodology and the central composite design are used to model and optimize bromide removal efficiency in the coagulation process. Bromide ions are naturally found in surface waters. Despite its non-toxicity, when exposed to disinfectants commonly used in water treatment, bromide ions produce disinfection byproducts which are more carcinogenic than their chlorinated counterparts. A key process in water treatment is coagulation. Most studies have recently focused on enhanced coagulation achieved by new coagulants known as inorganic polymer coagulants which exhibit a remarkable ability in both removing colloidal particles and reducing turbidity and the zeta potential from water. In the present experiments, poly-aluminum chloride (PAC) is used as a coagulant. Moreover, an experimental design is constructed using the Design-Expert software to develop an efficient model with a regression coefficient of 0.9925 which fitted the observed data on bromide removal efficiency. It is found that coagulant dosage and initial bromide concentration have direct impacts on bromide removal efficiency while a different behavior is observed in the case of pH.
Authors and Affiliations
Mohammad Abdollahpour, Keivan Shayesteh
Keywords
Related Articles
- EP ID EP179477
- DOI -
- Views 110
- Downloads 0
Modification of Granular Activated Carbon with Post-Treatment to Enhance Nitrate Removal from Drinking Water
Abstract The presence of nitrate in groundwater resources has instigated increasing concerns among both managers and users of, especially, drinking and sanitation water. From among the different nitrate removal methods,...
حذف تركيبات رنگزا از فاضلاب صنايع نساجي با استفاده از سيستم فتوالکتروکاتاليستي شامل الکترود فولاد زنگ‌نزن و گرافيت
Investigation of Dye Removal Efficiency of the Photoelectrocatalytic System Using Graphite and Stainless Steel as Electrodes Abstract The removal of Acid Orange 7 by the photoelectrocatalytic process was investigated a...
Modeling of Barium and Silica Removal from Wastewater of Reverse Osmosis in ZLD Process مدل‌سازي حذف باريم و سيليکا از پساب اسمز معکوس در فرايند ZLD
Abstract The concentration of elements such as calcium, magnesium, barium and silica would gradually increase in the wastewater treatment using RO systems. Reusing this wastewater in a second RO would cause precipitatio...
حذف سولفید از پساب با استفاده از فناوری جدید پیل سوختی میکربی و تولید همزمان انرژی پاک
Sulfide Removal from Wastewater Using the New Microbial Fuel Cell Technology with Simultaneous Clean Energy Generation Abstract Wastewater is nowadays a major concern in human societies that has encouraged many scient...
بازيابي بهينه آب با تأکيد بر نرخ مصرف فلوکولانت در تغليظ‌کننده Optimal Water Recovery with Emphasis on Flocculant Consumption Rate in the Thickener
Optimal Water Recovery with Emphasis on Flocculant Consumption Rate in the Thickener Water plays a vital role in mineral processing as evidenced by the approximately 2 to 3 tons of water used for the treatment of one to...