Kekuatan mekanik komposit diperkuat serat alam selulosa
Journal Title: Dinamika Teknik Mesin - Year 2018, Vol 8, Issue 2
Abstract
This study aims to analyze the tensile and impact strengths of three different types of composites. Composites are made from polyester resins with different fibers; Pandannus Amariliofius fiber (PPW), Eichhornia Crassipes fiber (PCH) and Coconut Fronds fiber (PPK). The three composite types have a polyester and fiber composition ratio namely 50:50, 60:40, 70:30, 80:20, and 90:10 (% volume). Manufacture of composite samples using a hot press technique. The results indicate that the tensile strength and Izod impact strength from the coconut fronds fiber reinforced composite is better than the other composites studied, due to the incorporation of fibers in the polyester resin matrix. These results suggest that in terms of their mechanical properties, the performance of the composite properties reinforced by the cellulosic natural fibers can be a candidate to replace artificial wood products.
Authors and Affiliations
Nasmi Herlina Sari
Keywords
Related Articles
- EP ID EP307606
- DOI 10.29303/dtm.v8i2.139
- Views 91
- Downloads 0
Heat loss from hot water flowing in a copper pipe insulated using air enclosed with a PVC pipe
This paper presents investigations of heat loss from hot water flowing in an insulated copper pipe. Investigations were performed to know the heat loss from a copper pipe insulated using air enclosed with a PVC pipe. The...
Pengaruh variasi kecepatan udara dan massa bahan terhadap waktu pengeringan jagung pada alat fluidized bed
Indonesia is an agricultural country that has many agricultural products so that post-harvest handling is necessary so that the crop is not quickly broken when stored or distributed. One harvests in Indonesia, which requ...
Pengaruh variasi pembagian jumlah anoda dengan pola horisontal terhadap laju korosi baja SS400 pada media air laut
Sacrificial anode protection is one type of corrosion protection used to inhibit corrosion rate. The sacrificial anode protection works by utilizing the potential difference between anode and cathode. This research aims...
Studi eksperimental terhadap porositas dan hambat alir udara pada komposit penyerap suara
In this paper, we present a comprehensive analytical and experimental investigation for the determination of the air flow resistivity and porosity of sound absorber composite. The ratio of the volume fraction of fiber an...
ANALISIS KEAUSAN DAN WAKTU PENGEREMAN KAMPAS CAKRAM ASBESTOS DAN NON ASBESTOS DENGAN VARIASI BEBAN PENGEREMAN DAN BERAT PENGENDARA PADA SEPEDA MOTOR HONDA SUPRA X 125 CC
Brake system is an important thing of vehicle. Many kinds of brake pads presents by each factory. Brake pads made of asbestos and non asbestos material. Each of them have excess and lack. This research aims to know the p...