KNOWLEDGE BASED ENGINEERING – AN APPROACH VIA AUTOMATED DESIGN OF STORAGE/RETRIEVAL SYSTEM
Journal Title: Proceedings in Manufacturing Systems - Year 2011, Vol 6, Issue 4
Abstract
Expanding markets and flexible commercial structures (e-commerce) generate various logistic demands and force manufacturers to offer diverse material handling equipment. To fulfill this demands specially the design process must be straight forwarded to minimize developing time, as most of the whole costs to produce a new product are settled here. Automated storage/retrieval systems (AS/RS) are backbones of many distribution centers and widespread. As they have lots of common attributes and nearly equal characteristics, they are predestinated for knowledge based techniques. The paper now describes knowledge based engineering in general and its additional value and focuses on a practical design of an AS/RS. The main describing equations are derived and the realization in ProEngineer is presented.
Authors and Affiliations
Christian LANDSCHUETZER, Dirk JODIN, ndreas WOLFSCHLUCKNER
Keywords
Related Articles
- EP ID EP120040
- DOI -
- Views 147
- Downloads 1
Research on the structure of metal parts manufactured by the innovative procedure of combined processing operations
The analysis of the structure of metal parts made by the innovative technological procedure of combined processing operations requires the investigation of parts by electronic and optical microscopy and micro-hardness de...
System for documents securing and intelligent management
The use of the RFID technology in all engineering-specific areas is no longer a novelty, this technology being employed today for documents securing and management. This paper presents an integrated system of documents s...
MANUFACTURING INNOVATION AND HORIZON 2020 – DEVELOPING AND IMPLEMENT „NEW MANUFACTURING“
In techniques, in all branches (without exception, I think) the knowledge of a parameter, of a variable value would allow to take suitable measures for the negative influence compensation, diminishing of that one. If the...
A PRELIMINARY STUDY ON THE ROTATIONAL MOLDING PROCESS
The rotational molding is a manufacturing method that allows obtaining parts with hollow form by rotating a mold around two perpendicular axes with the part material in the liquid state. Although the manufacturing meth...
Manufacturing Technology for a New Type of Profiled Rotor Used by a Rotating volumetric pump
The paper presents the sketch and the functioning principle of the rotating volumetric pump; a computation relation is established for the theoretical volumetric flow transported by the pump. The paper presents a mathema...