КОМПЛЕКС ТЕХНІЧНИХ ЗАСОБІВ ДЛЯ ВИЗНАЧЕННЯ ТЕПЛОТИ ЗГОРЯННЯ ПРИРОДНОГО ГАЗУ
Journal Title: Вимірювальна техніка та метрологія - Year 2018, Vol 79, Issue 2
Abstract
Article is devoted to the issue of selecting a gas representative sample directly of consumer from low-pressure gas pipelines as well as conducting representative studies of the natural gas heat combustion using a direct method with gas calorimeter. Article describes the disadvantages of chromatographic method for determining the heat of gas combustion and indicates the necessity of developing a gas calorimeter. Development of a sampler on the basis of a typical cylinder with the using pneumatic drive of various configurations is proposed. Lack of existing samplers is proved. It is related to the displacement of the gas sample taken with help of excessive air pressure. The latter can significantly change the value of the heat of gas combustion. We have developed a complex of technical means, which consists of a cylinder – dispenser with a pneumatic drive of a «tandem» type cylinder and a gas meter. Applying the «tandem» cylinder as a pneumatic actuator provides additional benefits that are associated with an increase in the overall effort on the drive rod. Developed complex links the piping system of gas pipelines and the calorimetric column, in which the sampling gas is burned directly and the combustion heat is sequentially determined. Mentioned cylinder-dispenser can be used in the mode of the piston sampler, and in the setting mode-dispenser, the metering device of the volumetric flow rate of natural gas. To select the gas sample a method of using the cylinder - the dispenser is developed. While determining of the amount of gas is performed, application of the pulse interpolation procedure aiming accuracy enhancement is proposed. For representative research, the heat of natural gas combustion is measured by direct measurement by calorimeter application with the direct burning of natural gas, and the complex of technical means for carrying out selection, injection, transportation as well as measurement of parameters of gas sample, is developed.
Authors and Affiliations
Igor Petryshyn, Alexander Bas, Lyudmila Prysyazhnyuk
Keywords
Related Articles
- EP ID EP531529
- DOI 10.23939/istcmtm2018.02.005
- Views 93
- Downloads 0
ІНФОРМАЦІЙНО-ВИМІРЮВАЛЬНА СИСТЕМА ДЛЯ ОПЕРАТИВНОГО ЕКОЛОГІЧНОГО МОНІТОРИНГУ ВОДНОГО СЕРЕДОВИЩА
Principles of construction of informational-measuring system for operative ecological monitoring of the water environment are offered.
АНАЛІЗ ТОЧНОСТІ ВИЗНАЧЕННЯ РІВНЯ ЯКОСТІ ПРОДУКЦІЇ З ВИКОРИСТАННЯМ ВІРТУАЛЬНОЇ МІРИ ЯКОСТІ
In the article the main problems of methodology of the qualimetrical measurements such as the question of the theory of the product quality measure are considered. The methodology of evaluation of precision of the qual...
ФАКТОРИ ІНЕРЦІЙНОСТІ РІДИННИХ МІКРОТЕРМОМЕТРІВ З ТОНКИМИ КАПІЛЯРАМИ
Micro- and nanothermometers with liquid-phase sensitive elements are made on the basis of capillaries filled with liquid. Important is the kind of liquid (water, alcohol, mercury, etc.), the angle of inclination...
КОНТРОЛЬ ЯКОСТІ ПИТНОЇ ВОДИ ЗА ЕЛЕКТРИЧНИМИ ПАРАМЕТРАМИ
In the article it is investigated the method of quality control of drinking water on the electrical parameters with the use of two electrode electrolytic cell. Is carried out the analysis of equivalent circuit and the er...
КЛАСИФІКАЦІЯ РИЗИКІВ КОМУНІКАЦІЙ ПІД ЧАС НАДАННЯ ОСВІТНІХ ПОСЛУГ
To minimize the effect of unwanted factors and losses in the provision of educational services are important because they directly affect the level of training and their ability to carry out professional activities. Ther...