LABORATORY RESEARCH OF TOE RESISTANCE BASED ON STATIC PILE LOAD TESTS IN DIFFERENT SCHEMES
Journal Title: Civil and Environmental Engineering Reports - Year 2018, Vol 1, Issue 28
Abstract
Transfer of axial force from the head of a pile to the surrounding soil by skin friction and toe resistance is still uncertain. The results of the static pile load test are usually presented as settlement curve. This curve can be divided into two components: skin friction curve and toe resistance curve according to the settlement. Laboratory research of pile load test was carried out in two schemes: with skin friction and without skin friction. The study proved that the toe resistance with and without skin friction is not the same. Skin friction influence on toe resistance due to settlement. This phenomenon is not usually taken into account, but very often has a significant impact on axially applied load transfer. In the paper results of laboratory pile load tests id, different schemes were presented<br/><br/>
Authors and Affiliations
Krzysztof ŻARKIEWICZ
Keywords
Related Articles
- EP ID EP346508
- DOI 10.2478/ceer-2018-0014
- Views 58
- Downloads 0
THE IMPACT OF VARIED FERTILISATION ON THE CONCENTRATION OF CADMIUM AND COPPER IN ORGANS OF WILLOW TREES (SALIX VIMINALIS)
The paper presents the impact of varied fertilisation with sewage sludge on the concentration of cadmium and copper in willow organs during the first three years of cultivation. The lowest mean concentration of cadmium i...
THERMAL RENOVATION OF BUILDINGS WITH THE USE OF STRAW - EUROPEAN EXPERIENCE
The selection of building materials to a huge extent shapes building impact on the environment. In the era of widespread awareness of health problems arising from toxicity of chemical substances, healthy and safe materia...
ANALYSIS OF STRESS IN STEEL AND CONCRETE IN CFST PUSH-OUT TEST SAMPLES
The paper presents the analysis of stress in steel and concrete in CFST composite elements subjected to push-out tests. Two analytical models of stress distribution are presented. The bond at the interface between steel...
CHANGES IN THE STRENGTH OF THE POLYMER CONCRETE USED IN THE ELECTROPLATING VATS UNDER OPERATIONAL LOAD
Due to the strong and aggressive electrolyte media and thermal load, design of the electroplating vats in the copper industry often relies on the resin concrete. The article presents the results of the strength tests of...
Transboundary impact of the lignite mining on the groundwater resources within Lusatian Neisse basin